Network Security

Hi,can i configure different port profiles on different interfaces on the same switch ?if i can, does it mean that each port will have dedicated Auth vlan\Access vlan ?for example:Switch-floorAFa0/0 (port profile 1) : Auth vlan: 10, Access vlan: 110F...

I am trying to have internal users behind an ASA use a VOIP application. The vendor mentioned to me that their application needs SIP to extend UDP ports 5060 to 5063. Below is what I did.object-group service Five9_SIP udp description Five9 UDP Ports ...

Hi,Does anyone know if it is possible to trigger a failover in case a certain IP is unreachable? I know you can do that based on interface state but I would need to do that based on a gateway reachability.Regards,Christophe

Hi,Need help in configuring the ASA Firewall. We have a ASA Firewall in which one interface is WAN link, one is production link and the other is the connectivity to corporate location.My production servers will be sitting behind the production interf...

In Device Center I am missing the following fields:Inventory Last collected TimeConfiguration Last Collected Time As well as missing the Management tasks functions available window. I can see the data config archive in The Device Managability Status ...

Hello !We are using UnixODBC and FreeTDS to connect to the LMS 3.2. We use the utility isqlWe have enabled the username lmsdatafeed and the pw. We have created a dsn in the odbc.ini to connect to RME.We manage to connect to the database ( rmengdb) bu...

Hi,Im facing high cpu usage in my 4200 device. The output of "top" is attached.i have not enabled iplog in ips.Pls provice an immediate solution if possible.....~pr

ASA 5510v8.2(1)I've been troubleshooting this clientless SSL vpn issue now for what seems like years. It's hit or miss and I can never reproduce it. Problem is, remote users using the clientless ssl with rdp plugin to access terminal servers random...

one of our clients has an ssl vpn setup of firewall -- ACS -- Domain database.There is a requirement that we have a fallback for authentication to vpn in case domain database is unavailable/fails.i.e. if this happens, ACS checks the domain & if it is...

Hi Guys,A basic firewall issue-network topology is as follows-R1-PIX-R2R1 config-interface Loopback 0 ip address 192.168.1.1 255.255.255.0!interface fastethernet 0/0 ip address 10.1.1.1 255.255.255.0!ip route 0.0.0.0 0.0.0.0 10.1.1.2!R2 config-interf...

Currently running IPSEC VPN on a Concentrator. We have users that use a lot of public wireless, Sprint Air Cards, and hotel networks. Most of the time the IPSEC works fine but sometimes it requires multiple connection attempts or drops which is obvi...