We are evaluating the PIX firewall for use. From the documentation i see that its not possible for me to URL filtering using PIX. THe solution offerred is using websense ( $$$$ ) How is this done. ThanksMad
We are evaluating the PIX firewall for use. From the documentation i see that its not possible for me to URL filtering using PIX. THe solution offerred is using websense ( $$$$ ) How is this done. ThanksMad
Is the pix capable of proxying DNS requests and if so, will it do any validation of the DNS response? I'm concerned about buffer overflow and invalid formatted DNS messages going into and out of my network.Thanks
hello,my customer is having the ff;users---6506---3640-----remote routersthe 6506 was also conncted to the HQ thru where the mainframe resides6506--------infrared--------HQ-----mainframewith the above scenario, the 3270 applications from both the rem...
Whats the most effiecent way to block packets with both the SYN and FIN flags set in a PIX running 6.3?
We upgraded OS to 6.33 and pdm Ver 3.0(1) on 3/16/04 and now I cannot access the firewall from my workstation.The login appears then the pdm.html starts to load but stalls. Any ideas on what I can do?
Hi,been having some frequent strange http post "attack" on my webserver... how can i disable http post method on pix? wat command to be used?Thanks,Steven
Hi,I'm running a PIX 515E, 6.1. I would like to run some port scans FROM a host on the inside against my server on the Internet. Unfortunately when the inside host starts a stealth scan - sending ACK packets instead of SYNs - the PIX blocks the outbo...
Hello Everyone!This is my first topic on this forum, I´m also a novice when it comes to Firewalls. I´m trying to setup a PIX 501 in the office using the DHCP capabilities of the PIX 501. Without the PIX the network works fine. Several computers conne...
HiI want to know which consideration should i need to have for configure in the same Router Lan to Lan Ipsec Vpn and Remote Access(Dynamic Crypto Map) Ipsec Vpn.I have read that the Dynamic Crypto map need to have a lower priority than the Static cry...
What protocol used to communicate between PIX MC and PIX? https right?
How many maximum ssh session (concurrent) access to PIX?How many maximum telnet session (concurrent) access to PIX?
Has somebody any experience with Net2phone on a Lan behind a pix.I'm tring to connect from the LAN to another net2phone extension, but I'm unable to connect.The Pix is using PAT to connect the internal users to the internet. I had a look at the Net2P...
Hi!!! I have CiscoWorks 2000 Rwan with IPM. I installed and configure IPM to send snmp traps when the treshold is excedeed. I can see on the graph that it is exceeded but I can not verify that it sending snmp traps.Where to view these traps and how t...
We have two sites one without any internet line just a frame relay that gets routed to the next site where we have internet line. Just got a 515e to do nat. Is it possible to do this with one physical connection at main site (the one with internet li...
I have a pix 515e and am having trouble getting to a remote site 3 hops from my central office router. The addresses are all 10 nets. I can get to everything directly attached to the central office 3600. I am not running any sort of routing on the...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-27-2024 05:00 PM | ||
04-26-2024 02:14 AM | ||
04-22-2024 06:41 AM | ||
04-21-2024 09:36 PM | ||
04-17-2024 12:36 PM |
User | Count |
---|---|
10 | |
6 | |
4 | |
3 | |
3 |