I'm looking for the I/O specs for the SFP-10G-SR-S. I know it's CML but what are the exact levels and thresholds? Are there any caps on the outputs? Can it run slower then 10G bps? The datasheet I found on the website doesn't show these details. ...
Hello,
do someone now if is this compatible:
Mellanox ConnectX-4 Lx 2x25GbE SFP28 Adapter with XL-MGB-SX (on cisco N5K).
If you have some sfp transreciver compatibility web-site, please share it with me.
Thanks
Hello,
I want connect C3750E and C3850. The distance is about 1,5 metres. I have a X2-10GB-LR-Module and a SFP-10GB-LRM and MCPs too. The wavelength is the same -1310nm. But I think, the transmit power is different.Is this possible?
I recently purchased two SFP-10G-SR SFP+ modules and I can't seem to get them to work at all in my WS-C3650-PD48-S
I put the SFP into either 10 Gigabit port and I see this on the console:
Jul 1 00:16:18.527: %PLATFORM_PM-6-MODULE_INSERTED: SFP mod...
Hi cisco team.
I have issuse when connect SFP 3rd party (ZyXel) to switch 4506.
HCM-DC-Core-Cat4506-01#show hw-module slot 1 port-group Module Port-group Active Inactive------------------------------------------------------------- 1 1 Te1/1 Gi1/3-4 ...
Hello everyone,
I work as network administrator in industry company and i am about to install our local network throughout the areas of the factory. i have designed my network with all the specification needed (see the attached file). i am going to ...
Hi,
I am using 3550 switch with sx gbic at one end and 2960x with glc-lh-smd at other end but link is not coming up. In am using multimode fiber.
I have tried changing fiber cores but still the link is not coming up.
Pls suggest ..
Greetings,
I have a few question as it pertain to SFPs and Distance. The current scenario is as follows:
We have switches at training locations that are approx. 20-30 Kilometers from our core. We currently use SFP-10-LRs for most of our applications...
We have had some rat problems at one of our sites. For some reason they chew through our fiber that feeds our IDFs.
I want to have a roll in stock so we can replace a run if necessary. I need 6 fiber, 62.5/125 mm, tight buffered fiber. I usually t...
Hi. Can anyone verify that the Cisco15454 has the ability to be monitored via multiple TL1 TCP/IP Connections? And if so, do you use different port number for each connection? Also if the older Cerent devices are also able to do this?
Hi, im Victor and im having two problems in a switch, from one side i have a switch A te2/0/2 connected to a Switch B te2/0/2, the switch sometimes blink orange Green, and sometimes is blinking Green only. If the port ar runing a few hours, it sudde...
I've recently upgraded a stacked pair of WS-C3850-12XS switches to version 03.07.05E. Following the upgrade, the primary switch in the stack no longer recognises the SFP's connected in ports 1/0/1 & 1/0/6. The secondary device has SFP's connected in ...
I have Purchased 1572 outdoor AP (AIR-CAP3702E-C-K9). How can i power up in this AP. Because there is no PoC, DC power cable with this AP. and also i have no PoE connection by which I can power up this AP. But I have Fiber connection for SFP. So is i...
A few years ago I was close to gettting my CCNA with my first AAS degree. I just recently got a few switches. I just acquired a Cisco MDS 9148 Fiber switch. Its very very cool. What can I do with it?
