Other Collaboration Subjects

We are installing 7970's in residential environments, and would like the customers to be able to switch the backlight off, but there seems to be no way to do this aside from a timeout.It seems like the on time should turn the backlight on, and it sho...

In Call Manager 4.1(3) can I install custom wave files and then use them as ring tones on Cisco 7960 phones. If yes where can I find a detailed document on how to do so? I am finding alot of procedures on Cisco's site for installing custom ring ton...

Is there a Cisco videconferencing solution for conference rooms, not PCs, which integrate with the IPT infrastructure? If not, which options do I have using third party like Polycom or Tandberg to integrate with an IPT infrastructure?Thanks in advanc...

Hi,I have some CallManager server and I don't know admin password. I have one but it is not taht password.Can you tell me how can I do password recovery on CallManager server?Thanks,Vlaho

i cannot reset my 7960 and 7970 phones with the **#** sequence anymore. i had upgraded the firmware for both devices in the last two weeks and just noticed it is not working. i am running ccm 3.3.4. the firmware loads are p00307010200 and term70.6...

Hi everybody, When I am pushing xml objects to ip phone 7960, if xml is less than some amount of bytes,(something around 1600 bytes), text appears correctly on phone's display. But if xml is more than 1600 bytes, message doesn't show up on phone's d...

hello, When using the table of extension 7914 is not possible to configure the buttons individually to allow the transference of calls for the branches associates without the necessity to type the numbers.Thanks for your help

The data sheet for 7931 only mentions CME, does anyone know if it works with Full Blown CallManager (5.x version)

I implement the Cisco Unity with AA y voice mail application so I installed the exchange 2000 on the Cisco Unity Server so I have my own domain into the server. Now my customer needs that I added to Cisco Unity to his domain.What is the procedure to ...

Hi there,I need to integrate 2 CCM servers (CCM4.1(3) and CCM 3.3(5)) w/ 1 Unity 4.0.5. CCM4.1(3) w/Unity4.0.5 done, works properly.CCM 3.3(5) integration successfully. (I use Unity->manage integration-> ...Call Manager cluster2-> verify server, suc...

We are currently running Call Manager, Unity, and IPCC Express on HP DL 380 G3?s. Every 3 years on our critical server we put them on new hardware. HP is no longer selling the G4?s with SCSI drives. Is Cisco or anyone running these products on the...

Whats the problem with these 7911g's, they take ages to register, using cme 4.0(3), c3825-ipvoicek9-mz.124-4.XC4.bin, and the cisco recommended load for this version of cme SCCP11.7-2-1-0S.loads.Phones just reset constantly, have to power off and pow...