06-15-2009 10:42 PM - edited 03-13-2019 06:26 PM
Hi all,
I have problem with my C3660.
I want to configure this router as voice gateway.
But unfortunately, my voice port doesn't appear when I type "sh run".
But it is detected when I issue command "sh ver" and "sh diag".
My voice modul using 4 PORT Voice PM for MARs Port adapter (2FXS and 2FXO).
Thanks for any help.
ari
06-15-2009 11:29 PM
Are there the DSP on the NM ? Check show diag.
06-15-2009 11:56 PM
I'm using this module
Slot 3:
High Density Voice Port adapter
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.1
Top Assy. Part Number : 800-XXXXX-01
Board Revision : G0
Deviation Number : 0-0
Fab Version : 02
PCB Serial Number : JABXXXXXXXX
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 CC 41 01 01 C0 46 03 20 00 0D EF 01
0x10: 42 47 30 80 00 00 00 00 02 02 C1 8B 4A 41 42 30
0x20: 35 34 36 30 43 4E 42 03 00 81 00 00 00 00 04 00
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 0:
T1 (1 Port) Multi-Flex Trunk WAN Daughter Card
Hardware revision 1.0 Board revision A0
Serial number 27XXXXXX Part number 800-03568-03
Test history 0x0 RMA number 00-00-00
Connector type PCI
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 20 01 00 01 9F DA 68 50 0D F0 03 00 00 00 00
0x30: 50 00 00 00 01 11 08 00 FF FF FF FF FF FF FF FF
HDV firmware: Compiled Mon 26-Nov-01 16:24 by miriyala
HDV memory size 524280 heap free 202857
06-16-2009 12:02 AM
Seems like there are no DSP on it.
For sure no FXS/FXO ports.
06-16-2009 01:19 AM
06-16-2009 10:52 AM
What IOS feature set are you using? Are they feature sets or versions different between the top routers?
06-16-2009 05:05 PM
Using c3660-ik8s-mz-122-6c-M1.bin for both
Seems like the problem is on NM voice module (2V).
What do you think ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide