09-17-2023 12:36 PM
I'm trying to understand why Evpn-learded route [2]:[0]:[0]:[48]:[dead.beef.0003]:[32]:[15.0.0.1]/272 is not advertised to the leafs...
It is present in tenant1 routing table on Border Leaf and in l2vpn evpn BGP AF but "Path-id 1 (dual) not advertised to any peer".
Any help will be appreciated
Here is how full BGP evpn l2vpn table looks like on Border Leaf BL31: https://pastecode.io/s/asa1s8gv
"sh bgp l2vpn evpn 15.0.0.1" on border leaf BL31: https://pastecode.io/s/zgnupmk5
tenant1 routing table on border leaf BL31: https://pastecode.io/s/08modvry
tenant1 routing table on leaf L1: https://pastecode.io/s/45rshawq
BGP evpn l2vpn table on leaf L1: https://pastecode.io/s/14iuqhwh
configuration of L1: https://pastecode.io/s/ge1mv5wg
configuration of BL31: https://pastecode.io/s/ap8xrqbj
topology : https://pasteboard.co/tCefwOaOrwot.png
Solved! Go to Solution.
09-18-2023 09:46 AM
The problem was related to missed configuration ( below ) from https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-739942.html
Note, the mask for loopback interface should match the Vlan CIDR ( at least in my setup )
09-18-2023 09:46 AM
The problem was related to missed configuration ( below ) from https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-739942.html
Note, the mask for loopback interface should match the Vlan CIDR ( at least in my setup )
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide