Other Network Architecture Subjects

Hi,when i m trying to launch cisco view, it is giving me an error "Pls grant permission to launch cisco view". I have installed cisco works for windows.can anybody help me out?Thanks

Hello Cisco Netpros,Does anyone has a suggestion about how we can make Cisco Secure do real-time disconnection of running dialup sessions on the access server, say on a prepaid setup? Appreciate any insight.Thanks and regards,RICO

Quick question, I seem to remember hearing that if you have 2 6500's each with dual sup's and MSFC cards running in SRM HSRP does not work between the 2 6500's. Can anyone verify this?Thanks.

hello,will a frame-relay T1 push 1.5M out and 1.5M in for a total of 3M.thanks,

Hi,what is the meaning for the term like...DCD=up DSR=up DTR=up RTS=up CTS=upthis appears when u say the command #sh int serail0regards..m

Is there a way to get the serial # of a 2600 or 1700 router without actually going to the box?

Since implementing SSH on a 3550 I can NOT access the switch through a browser, WHY?

What is the maximun number of secondary interfaces on routers & switches? What are the problems with having more than one?

Is it recommended to have two 6500 switches at the core or 1 core 6500 and a cold swap unit?This would be for a medium sized company.

HiI am connecting 2 buildings together over a Laser line of site link.On both sides of the Link are 2 3550 Layer 3 switches.I just need someone to check if what I am trying to do is correct.I am setting up a routed hop between the 2 switches by setti...

Hi there,A customer is using CiscoWorks Small NMS Solution with the following components:CWSNM-1.0-WIN CiscoWorks Small NMS Solution, Incl. WUG 7, CV 5.3, RME 3.3 SIt is said we can import Cisco device information (Device name, IP address, and SNMP c...

Has anyone else experienced PPP (LCP) problems when using a 37xx series router as a RAS. More specifically the actual problem we see is intermittant connectivity when a client attempt a dialin. Some succeed,some fail. The problem exists for both PSTN...

Hi ;I have got two routers in HSRP COnfig .Should the NAT address to go outside be the same on both routers .Or it does not matter .So one router ;virtual address 10.1.1.3fasteth0/0 10.1.1.2fasteth0/1 19.20.24.34 nat for 0/1 19.20.24.33 second router...

The ANIserver from CW2000 starts with the flags:-cp:a /opt/CSCOpx/lib/classpath/servlet.jar -Dvbroker.orb.gcTimeout=90 -mx512m com.cisco.nm.ani.server.frontend.AniMain My question is:What´s the propertie file on Solaris where the value "-mx512m" is s...