I have a 2924mxl with ATM uplinks. I am not able to download the configurations into Device Configuration Manager. is there any special config required on the device or in CW2000 r5 I need to do?
Ok, so this is not so much a Cisco question as much as it is a..."What the heck is going on here" sorta question. I have a feeling that this might be a stumper, but hopefully someone out there has an answer. So here is the problem...We are currently ...
With which MIB parameters is it possible to read the username and the actual ISDN call duration from Cisco routers to get information about active calls into networkmanagment?
I am new to Works2000 and having trouble with RME. I am running RME version 3.4 with the IDU1.0 installed. My problem is that evertime I try to do anything with "Configuration Management" such as update the archive from a device I get a message sayin...
Quick Question..... Does the 4006 supII have vtp version 2 enabled by default or do I have to manually enable it? Here is what my config shows......Domain Name Domain Index VTP Version Local Mode Password--------------------...
I have a home user with ISP provided DSL modem and Gateway XP desktop. All browsers work when PC is directly attached to modem. I added a SOHO71 and Cisco Wireless home network as well as a Gateway XP laptop. I am using an IBM Win2000 laptop with ...
Hi,I was wondering if there is an easy way to export the DFM database and then re-import onto another machine? I've tried using backuprestore.pl but that doesn't restore the database only DFM and CMF (although the directory DMF does appear under the ...
Hi, what is the best way to poll a config from a switch and push it to a number of switches of the same type in one shot ... bypassing TACACS. Can we do this in cw2k ? Help pls.
We are having a strange problem, where when we aply policy-map in ATM interfaces , it is OK , but when we remove this configuration we saw the messagem above in syslog server where the traffic in ATM interfaces stops completely and BGP stops a rel...
Can anyone please tell me what the Check=## means in this output?core1-rtr>sh ip access-listStandard IP access list 75 permit xxx.xxx.73.223 (12272429 matches) check=9 permit xxx.xxx.203.30 (188864 matches) check=14 permit xxx.xxx.72.111 (37...
I have created a gre tunnel utilizing 2 2611 routers. I am experiencing very slow transmission speeds and packet loss. It so bad it is impossible to transfer anything. When i ping the through the tunnel i am receving about 25% packet loss. I can acce...
- Router A and Router B connect using ISDN. Router A dials Router B's SPID1 and gets connected. But second cahnnel never connects since Router A is trying to dial the Router B's SPID1 again while its busy already.Router A IOS is V12.12 (c1600-y-mz.12...
I am accessing the switch through 3 steps as follow:TELNET switch name (or IP address), Enter Login ID and Enter Password.How can do the 3 steps in 1? Is there any specific parameters where you can add the Login ID and password next to the switch na...
