Other Network Architecture Subjects

Hi,Just new to this community hopefully someone will be able to help me out. Then as my knowledge increases hopefully I'll be able to help someone else out!I'm using a 2821 purely to provide ntp to the network. It is set as ntp master 12. If I config...

Hi All;I am looking for a consultation document that can be used for auditing the network, does any one has a sample or idea about this? A reference link or sample document that I can refer it for it?RegardsBilal

It appears from documentation thatI have been reading thatit is possible to use Netscout software to manipulate Netflow data? I have not had muc luck figuring out how to actually make this work.Any ideas?Thanks. Russ

Has anyone has any luck getting DHCP clients to register properly with IOS DNS server? I've given this a crack on various routers and I'm just about ready to give up and call it a beta capability.If you have a look at my debug below, I can successful...

Hello,Can someone advice me on a HSRP status from a supervision station :If we delete a HSRP configuration on a device, the related enties are not accordingly suppressed in the MIB. The consequence is the presence of alarms on the supervision station...

Hello,I have a catalist 6500 (sup 32) and i'm using User Based Rate Limit based on the source IP address.I have a pool with 50 public address, with ovewrload.How can i assign a diffrent IP address to each request, and only repeat the same address whe...

Does anyone know of a way to suppress a specific syslog messages from being generated? I would like to filter these from all syslogs (buffer, terminal, syslog server). I would like all other messages to generate as normal. For instance, drop anything...

I configured a Cisco 876w to connect to an existing WLAN as a client. Now I would like to connect 3 PCs to the 876w which should be able to access the internet via the 876w.Problem:Being at the console (ssh) of the 876w, I can ping hosts in the inter...

Hi,I need to upgrade the network module of a Cisco 3745 from DS3 (DS3 port) to OC3.I have read the document below and it seems that NM-1A-OC3-POM (MM) will be the suitable module for it.http://www.cisco.com/en/US/prod/collateral/routers/ps259/prod_en...

testPosted from my mobile device.

Does anyone know if you can upgrade to 64meg of flash on 6509-sup2-msfc2 to support a WS-X6148-GE-45AF blade?

I know the dread qos on a 6500 with IOS issue, it's a pain to us all and I need help my friends.  Just upgraded a customer site to Sup32's and going to IPT, implemeted first closets and next morning awoke to emails of :%QM-4-AGG_POL_EXCEEDED: QoS Har...