09-18-2006 06:38 PM - edited 03-03-2019 05:06 AM
[1] Can someone tell me the difference between the config register value of 0x2102 and 0x2102.
[2] Where to find the meaning of all the config-registers from Cisco Doc ?
Thank you,
- sn -
Solved! Go to Solution.
09-18-2006 06:55 PM
Sanjay,
The below document should address questions around Config-registers.
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml
I hope it helps.
Regards,
Arul
09-18-2006 06:55 PM
Sanjay,
The below document should address questions around Config-registers.
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml
I hope it helps.
Regards,
Arul
09-18-2006 08:49 PM
Hi Sanjay,
The config register setting is used to change the router behavior in how to boot and options to used while booting like ignore configuration, disable boot messages
0x2102 - factory default settings for config reg
This tells the router should attempt to load a Cisco IOS? software image from Flash memory and load the startup configuration with a console speed of 9600 baud.
few main settings
0x2100 - ROM MONITOR
0x2101 - Boots in ROM
0x2142 - Password recovery; ignores NVRAM Config file
Hope this Helps
Thanks,
Raj
09-18-2006 08:55 PM
Hi
You can download Boson ConfregCalculater
This is good tool for reference.
http://www.boson.com/FreeUtilities.html
Pls rate all posts
Regards
JD
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide