Hi, I know that in ospf, "distribute-list in" command does not prevent the routes being propagate out, it only prevents the route being install in the local routing table.
But when I do the same test for eigrp and rip, "distribute-list in" seems also filtering the route being advertised to the next hop. Is that true??
Below is an example configuration:
(10.1.1.0)-RouterA-(11.1.1.0)-RouterB-(12.1.1.0)-RouterC
RouterA:
router eigrp 100
no auto-summary
network 10.1.1.0
network 11.1.1.0
RouterB:
router eigrp 100
no auto-summary
network 11.1.1.0
network 12.1.1.0
distribute-list 1 in
access-list 1 deny 10.1.1.0 0.0.0.255
access-list 1 permit any
RouterC:
router eigrp 100
no auto-summary
network 12.1.1.0
RouterC doesn't see the route 10.1.1.0 !! why?
