cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
208
Views
0
Helpful
1
Replies

flash no exist

bgoran
Level 1
Level 1

Hi,

this is my problem:

Router#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C1700 Software (C1700-K2OSY-M), Version 12.0(3)T3, RELEASE SOFTWARE (f

c1)

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Thu 15-Apr-99 13:21 by kpma

Image text-base: 0x80008088, data-base: 0x80701530

ROM: System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)

Router uptime is 1 hour, 34 minutes

System restarted by power-on

System image file is "flash:aaa0476.bin"

cisco IPM (MPC860) processor (revision 0x100) with 44237K/4915K bytes of memory.

Processor board ID FOC06160FBG (2484592192), with hardware revision 0000

M860 processor: part number 5, mask 2

Bridging software.

X.25 software, Version 3.0.0.

32K bytes of non-volatile configuration memory.

Configuration register is 0x2102

Router#dir ?

/all List all files

null: Directory or file name

nvram: Directory or file name

system: Directory or file name

xmodem: Directory or file name

ymodem: Directory or file name

Unknown file system <cr>

Router#show file system

File Systems:

Size(b) Free(b) Type Flags Prefixes

29688 29179 nvram rw nvram:

- - opaque rw null:

- - opaque rw system:

- - opaque ro xmodem:

- - opaque ro ymodem:

- - network rw tftp:

- - network rw rcp:

- - network rw ftp:

Where is flash directory?

Thanks,

Goran.

1 Reply 1

tepatel
Cisco Employee
Cisco Employee

Lets see what "sh flash" reports..Tejal