Is it possible and how to configure on a E1 PRI ISDN channel incoming only and/or outgoing only ?

[admin_2]

I remember that it should be possible someway but I don't remember how (dialer max-link ??)

[#2]

For incoming only, do not configure any

dialer maps or strings on the PRI;

in that case we will not be able to dial.

For outgoing only, you can use dialer

profiles, and under the PRI configure

"dialer pool-member 1 min-link 31", which

will cause all the B-channels to be

reserved for outgoing calls.

You could also place a CLID filter

on the PRI ("isdn caller 1") that will

never be matched; in this was every

incoming call will be cleared.