11-19-2003 05:16 AM - edited 03-02-2019 11:49 AM
Hi,
I need to configure the Internet access in my LAN. my 801 router will connect to the internet without any static IP (dial-up internet).
how to configure nat in my 801
regards
shoeb
11-19-2003 05:29 AM
1.Under your dialup interface (BRI/Dialer) which is connecting to ISPconfiguration say
" IP NAT OUTSIDE "
2.Under your LAN interface (BRI/Dialer) configuration say
" IP NAT INSIDE "
Under global configuration say.
3." IP ACCESS-LIST 100 PERMIT IP ANY ANY
4."IP NAT INSIDE SOURCE list 100 INTERFACE OVERLOAD BRI/DIALER "
11-19-2003 06:16 AM
so if my config will change like
!
interface Ethernet0
ip address 192.168.1.20 255.255.255.0
ip nat inside
no cdp enable
interface Dialer1
description CONNECTION TO INTERNET
ip address ?????? 255.255.255.0
no ip directed-broadcast
ip nat outside
what will be my dialer IP address ? will it be in the LAN subnet?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide