03-17-2004 07:05 AM - edited 03-02-2019 02:21 PM
I need to know if I can update the flash to 32MB of router 2621, with my present rom memory:
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JO3S56I-M), Version 12.1(7), RELEASE SOFTWARE (fc
1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Thu 22-Feb-01 15:20 by kellythw
Image text-base: 0x80008088, data-base: 0x810FD358
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROUTER_CLIENTES_VLAN uptime is 5 weeks, 6 days, 16 hours, 53 minutes
System returned to ROM by reload
System image file is "flash:c2600-jo3s56i-mz.121-7.bin"
cisco 2621 (MPC860) processor (revision 0x102) with 59392K/6144K bytes of memory
.
Processor board ID JAD04400OLA (1701649984)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
03-17-2004 08:00 AM
You can upgrade your flash, but make sure that the version of IOS you want to run will work with only 32M of DRAM.
03-17-2004 08:40 AM
Cisco 2620 and Cisco 2621 routers can be upgraded to support a maximum of 32MB of Flash memory when using both the Cisco 2600 BootROM version 12.1(3r)T2 (supplied with Cisco p/n MEM2620-32FSBoot=) and Cisco IOS Release 12.1.3T, 12.2, 12.2T, or later Cisco IOS versions.
For the full reference, use the following URL:
Hope this helps,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide