10-30-2007 02:12 AM - edited 03-03-2019 05:32 AM
My router 3745 boot on ROMMON mode could you help ?
Many thinks
10-30-2007 02:16 AM
Hi Friend,
Can you check if this router has some image in flash with a command "dir flash"?
Then try manually boot command to see if it boots up.
rommon>boot
If it boots then check the "sh version" and confirm if config register value is set to 0x2102 and also verify the boot statement.
HTH
Ankur
*Pls rate all helpfull post
10-30-2007 07:25 AM
Hi
unfortunatly there is no image in flash
10-30-2007 07:31 AM
Hi Friend,
See if this link helps you
HTH
Ankur
*Pls rate all helpfull post
10-30-2007 08:01 AM
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
Ready to receive file ...
BB0BB0
Timeout waiting for data - aborting download...
It 's not workink that is the message i get
10-30-2007 08:06 AM
Hi Friend,
Did you tried xmodem?
Regards,
Ankur
10-30-2007 09:14 AM
Yes i did try it already
10-31-2007 02:08 AM
Hi,
Perhaps i can help.
1. You need a tftp server started from your PC/laptop.
2. connect cross cable from pc/laptop to the first physical interface of the router
3. assign laptop IP
4. follow url provide by Ankur
Rgds,
Christopher
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide