Other Security Subjects

Dear sir,we want to configure a firwall from desktop to outside world plz give me the example configuration with natting optionsrini9246571397

Dear sirhow i can open FXP (server to server FTP) through the Cisco Firewall.where i think it disabled be default for the risk of FTP Bounce attack.Thanks

i become allways an BootCode 4.0 update failure "flash erase failed" !!!this is the second box (3005)with this behavior.vpn: Admin -> 1) Concentrator2) Clients3) Bootloader4) Backvpn: Admin -> 3WARNING:-- Before beginning the bootloader upgrade, be a...

How can i know the licensing support for AIM-VPN-II-plus on cisco 2811?

Hello, I'm trying to configure a couple of profiles on my 3800 router to support Cisco VPN client connections. Based on our security policy the passwords are alpha-numeric, 20 chars. long and are added a -01, -02, -03 sequence by the end. The thing ...

Hi,I'm configuring the GRE tunnel via frame relay cloud between 3 routers.On the remote site ,tunnel destination point is translated to global address(It is doing Pat).so when I configured the tunnel destination with that translated address ,tunnel g...

I have a LAN to LAN tunnel up between a Cisco 3005 & 3015. I want workstations connected to the private interface of the 3005 to get IP addresses by DHCP from a DHCP server on the network the private interface of the 3015 is connected to. Can I do th...

We are using the 5.0.02.0090 client.Right now it seems that you have to preselect which certificate you want to use to be able to login.Is it possible for a user that has never logged into the box to be able to use start before logon with a certifica...

SCENARIO:-3800X2 connected thru leased line-routing prot is RIP-vpn with gre configured-(access-list premit gre host 192.168.1.1 host 192.168.1.2)OBSERVATION;-without transferring any traffic from point lanA to point lanB, sh crypto ipsec sa will sho...

I have a BBSM server and would like to authenticate wireless clients associated with an access point, before going out to the internet.How do i do this

Hi!I am in the process of building a template for DMVPN Spokes on the Cisco 828. During the initial phase, I noticed that 12.4(5c) in the k9osy6-mz suite lack support for NHRP. After a few searches I came up with "http://www.cisco.com/en/US/products/...

I have a 2811s doing many VPNs to partners and clients. These routers are on my "VPN" network off a PIX 525. I use static routes on the PIX to get the traffic from my networks to the appropriate router and then down the VPN. This has been the setu...

A group within my organization has built a CME system. They want access to the CME system to be available from the office VPN which terminates on an PIX 7.2 box. We're pretty strict about filtering traffic, so we need to implicitly allow RTP traffi...

I am using client version 5.0, PIX 506e and Microsoft IAS to vpn into a corporate network. Once connected some users have problems with their Outlook unable to connect to the Exchange server. Trying to figure out if I need to make a configuration cha...