HiI just got two ASA5510-SEC-BUN-K9 and I'm wondering is it possible to implement an Active/Standby Failover configuration (Routed mode) with two ASA5510 and redundant pair of switches from both inside and outside interfaces? In other words, I would ...
I'm about to set up easy hardware VPN client on my asa 5505. Received 2 errors. I corrected the first. Second error is to VPN Client enabled -"detach crypto map attached to interface outside"I'm using the asdm. Do I need to use command line to remove...
I have enabled the http server function on my cisco router. When i log in and try to access the "monitor the router" weblink at any priviledge level, i get "The Page cannot be displayed Error" message. The webpage is "http://172.16.62.69/level/15/exe...
Hi,I have trouble trying to get clean access agent popup in the L2 OOB NAC deployment.I'm using version 4.1.1. My hosts will correctly get redirected to the CAS to download the CCA. But after installing the agent it doesnot get poppedup. (popped up i...
Does Cisco have a patch to mitigate a vulnerability of ICMP Timestamp request for the following Cisco IOS? If they are I would like to know the patch number for the fixes. If not, are the IOS patched when purchased?The IOS' are:12.4(4)T ADV ENT 12.2...
We have a server hosting Syslog service for an application on default port 514. Can we bring a Syslog service on the same server for FWSM and if you what are the conf changes required?
I have recently installed an ASA5510. I need to forward certain incoming internet traffic to a few internal servers as below:These 3 are already configured with NAT and security policy via ASDM.tcp-smtp traffic from 66.66.66.66 goes to 192.168.1.16tc...
can some body advise me on a small problem concerning crl URL'S on a vpn 3000 concentratorrather than try to explain i have put a screenshot on the attachment along with a question. regards melvyn brown
Hello,Is there a way to save the NAT table from ASA and PIX. In case of any problem I can track only till the firewall where NAT is placed (if somebody comply that from my IP pool some unusal traffic goes..)byeFCS
hi,we have a MARS Box running which was not proper working. we initiated an advanced hardware replacement and after a few day's we've got the replacement box. unfortunately the config and the log-data are only stored local on the "old" mars box. we d...
We had a problem today with a 3002 talking to a 3000 concentrator.The IPsec tunnel kept bouncing up and down (connected for 5 seconds) then fixed itself after about an hour.The logs show the following message being repeated:Sending IKE Delete With Re...
Can someone provide instructions on what services/componets needed to be installed on remote install of SQL 2005? The instructions that I have from Cisco 5.2 points me to Microsofts site but not very informative.Thanks
I am trying to set up a system whereby I can access servers connected to the third(external) interface on my concentrator by a site to site vpn connected either by the internet on my public interface or via my lan on the internal private interface. I...
