Other Service Provider Subjects

Hi!I have SCE 8000 and try to limit bandwith for test user.My user has test Package with - Primary BWC UP/DOWN CIR 0 kbps PIR 2048 kbps, - Default BWC UP/DOWN CIR 0 kbps PIR 2048 kbps, - Bittorent BWC UP/DOWN  CIR 0 kbps PIR 256 kbps, - Download ov...

Hi all,After the ios upgrade the (Non-Cisco) LNS drops down the tunnels comming from the Cisco LAC.Scenario 1 : Cisco LAC <-> Cisco LNSScenario 2 : Cisco LAC <-> Non Cisco LNSThe problem comes from the new extension PPPoE rfc3817 of the L2TP rfc2661T...

Hello,Recently i was informed by ISP that my Internet leasesline is upgraded from 20Mb to 80Mbps , Can any onePlease tell me how to check this by using any tool or any method.Regards,KA.

Could someone be kind enough to brief me the difference between the two?Thanks in advance.

HelloI need solution to a similar problem , really appriciate if you can help me on this.I have taken MPLS services from my Service provider they have configured 8Mbps of MPLS bandwidth and 2Mbps of Internet bandwidth(using 2 Vlans) on their PE over ...

Can somebody help me understand the cause for no-buffer drops counters to be increasing. I have tried increasing the queue limit on standard class, Even after that i see the drops to be increasing.Truncated show policy ouput    Class-map: class-defau...

Hi,I have Cisco Access Registrar working as Proxy Radius while authentication/authorization is being done by third party radius. CAR doesn't have profile for that user.My requirement is that whenever 3rd party radius sends Access-Accept packet, CAR s...

Hi allgot BIP connection from ISP, with block of public ip's (100.100.100.1/30)PE: 80.80.80.1 /30CE: 80.80.80.2 /30there is server on the LAN side which I want to be accessed via public IP 100.100.100.2how can i go about setting this using just 1 box...

Hi everyone,We got alarms from CTC after we configured NTP on ONS node, anyone could help to clarify us about cause of alarming?Please see figure about alarms on CTC as attached.

Dear all,recently i'm successfully managed to bring cable modem to docsis 1.1 qos, via cm config file.and then already config cable service-class to match with cm config file.the problem is cable modem still able online without matchin the cable serv...

Hi,am upgrade ios to router7600 but am upload new ios to sup-bootdisk only and then am reload the router i saw this logMod Ports Card Type                              Model              Serial No.--- ----- -------------------------------------- ----...

Hi,iam getting error as TEI_ASSIGNED in my router for ISDN BRI.Layer one is active.how to troubleshoot?

i came to an example where there is a following config:policy-map TEST  class class1     bandwidth 128     shape average 256  class class-default     fair-queuei remember that bandwidth set the minimum bandwidth, while police/shape set the maximum ba...