06-20-2012 02:23 AM - edited 03-01-2019 02:35 PM
Hello Experts,
Can someone please help me and the company I work understand the following error message taken from our logs.
-Process= "CEF LC IPC Background", ipl= 0, pid= 84
-Traceback= 40031140 400E50F8 400E9834 400E0C64 4147436C 414662B4 41467804 41483200 413C5954 413C5CA0 413C6BB4
SLOT 2:Jun 19 10:38:19.104 GMT: %TFIB-2-MEMORY: No memory for tag_rewrite
-Traceback= 40031140 41466308 41467804 41483200 413C5954 413C5CA0 413C6BB4
SLOT 2:Jun 19 10:42:39.370 GMT: %SYS-2-MALLOCFAIL: Memory allocation of 18196 bytes failed from 0x400E0C5C, alignment 32
Pool: Processor Free: 3246784 Cause: Memory fragmentation
Alternate Pool: Reclaimed Free: 10800 Cause: Not enough free memory
The device version is as follows:
EPUK-EGH1-GSR-1#show version
Cisco Internetwork Operating System Software
IOS (tm) GS Software (C12KPRP-K4P-M), Version 12.0(32)SY7, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Mon 29-Sep-08 14:02 by leccese
Image text-base: 0x00010000, data-base: 0x056B4000
ROM: System Bootstrap, Version 12.0(20080619:121934) [gradhakr-sq86358 1.20dev(0.1)] DEVELOPMENT SOFTWARE
BOOTLDR: GS Software (C12KPRP-K4P-M), Version 12.0(32)SY7, RELEASE SOFTWARE (fc1)
HOSTNAME uptime is 28 weeks, 1 day, 7 hours, 43 minutes
Uptime for this control processor is 28 weeks, 1 day, 8 hours, 37 minutes
System returned to ROM by reload at 01:32:50 GMT Tue Dec 6 2011
System restarted at 01:33:45 GMT Tue Dec 6 2011
System image file is "disk0:/c12kprp-k4p-mz.120
-32.SY7.bi
n"
cisco 12410/PRP (MPC7457) processor (revision 0x00) with 2097152K bytes of memory.
MPC7457 CPU at 1263Mhz, Rev 1.1, 512KB L2, 2048KB L3 Cache
Last reset from sw reset
Channelized E1, Version 1.0.
2 Route Processor Cards
2 Clock Scheduler Cards
5 Switch Fabric Cards
4 T1/E1 BITS controllers
2 four-port OC12 POS controllers (8 POS).
1 ISE 10G SPA Interface Card (12000-SIP-601)
3 Ethernet/IEEE 802.3 interface(s)
10 GigabitEthernet/IEEE 802.3 interface(s)
8 Packet over SONET network interface(s)
2043K bytes of non-volatile configuration memory.
500377K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
Your help will be greatly appreciated.
Cheers
Carlton
Hello Experts,
Can someone please help me and the company I work understand the following error message taken from our logs.
-Process= "CEF LC IPC Background", ipl= 0, pid= 84
-Traceback= 40031140 400E50F8 400E9834 400E0C64 4147436C 414662B4 41467804 41483200 413C5954 413C5CA0 413C6BB4
SLOT 2:Jun 19 10:38:19.104 GMT: %TFIB-2-MEMORY: No memory for tag_rewrite
-Traceback= 40031140 41466308 41467804 41483200 413C5954 413C5CA0 413C6BB4
SLOT 2:Jun 19 10:42:39.370 GMT: %SYS-2-MALLOCFAIL: Memory allocation of 18196 bytes failed from 0x400E0C5C, alignment 32
Pool: Processor Free: 3246784 Cause: Memory fragmentation
Alternate Pool: Reclaimed Free: 10800 Cause: Not enough free memory
The device version is as follows:
EPUK-EGH1-GSR-1#show version
Cisco Internetwork Operating System Software
IOS (tm) GS Software (C12KPRP-K4P-M), Version 12.0(32)SY7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Mon 29-Sep-08 14:02 by leccese
Image text-base: 0x00010000, data-base: 0x056B4000
ROM: System Bootstrap, Version 12.0(20080619:121934) [gradhakr-sq86358 1.20dev(0.1)] DEVELOPMENT SOFTWARE
BOOTLDR: GS Software (C12KPRP-K4P-M), Version 12.0(32)SY7, RELEASE SOFTWARE (fc1)
HOSTNAME uptime is 28 weeks, 1 day, 7 hours, 43 minutes
Uptime for this control processor is 28 weeks, 1 day, 8 hours, 37 minutes
System returned to ROM by reload at 01:32:50 GMT Tue Dec 6 2011
System restarted at 01:33:45 GMT Tue Dec 6 2011
System image file is "disk0:/c12kprp-k4p-mz.120
-32.SY7.bi
n"
cisco 12410/PRP (MPC7457) processor (revision 0x00) with 2097152K bytes of memory.
MPC7457 CPU at 1263Mhz, Rev 1.1, 512KB L2, 2048KB L3 Cache
Last reset from sw reset
Channelized E1, Version 1.0.
2 Route Processor Cards
2 Clock Scheduler Cards
5 Switch Fabric Cards
4 T1/E1 BITS controllers
2 four-port OC12 POS controllers (8 POS).
1 ISE 10G SPA Interface Card (12000-SIP-601)
3 Ethernet/IEEE 802.3 interface(s)
10 GigabitEthernet/IEEE 802.3 interface(s)
8 Packet over SONET network interface(s)
2043K bytes of non-volatile configuration memory.
500377K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
Your help will be greatly appreciated.
Cheers
Carlton
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide