Routers - Small Business

Good evening,I currently have one Cisco Linksys E4200 v1, and at this point, I am very happy with it. It can do 450Mbps of WIFI 5Ghz and all ports are GiB.But since it does not support VPN termination at least with the official firmware, I'm currentl...

I am trying to limit HTTP access to my server on the local network to a specific IP address.  I create an Access Rule in the firewall section, however that doesn't work.  The only way it works is if I add the internal IP address of the server to the ...

Hi Guys,Hope you can assist here. I have port forward my srp527w to have access to my Network Video Recorders over the internet.My isp issued me a static IP address 110.xxx.xxx.xxx so I assigned static IP addresses on my NVR s and set their Gateway t...

Hello, I'm from Venezuela and now I have a Cisco RV082 and I have some problems with https:// encrypted pages that are used most of all banks by page, once logged on that page you immediately ejected it, I assume that logical two internet connections...

I'd like to set each individual LAN port with different address i.e. LAN 1 192.168.1.1 and LAN 2 10.1.1.1 instead of using the multiple subnet feature and having all ports replying for the addresses created. Is this possible?Thanks

Hi,The scenario is as follows:- Small Home-Office network based on a Cisco WRV210 VPN Router connected to another WRV210 in a remote location.- The WRV210 provides 2 WAP-protected SSIDs, one for the office network and one for visitors- Wireless chann...

Hello all,i have two locations connected with a Wifi link. On location A, i have internet and a network 192.168.1.0On location B, i have intenret and a network 10.20.10.0On location A, the antenna can be connected directly on the network therefore it...

Hi,I want to know if is possible to publish a port of an internal server to be accesible from internet but only from a specific IP.I know that in Setup menu exists Forwarding but it allows to publish ports to all internet no matter the source IP.Than...

Dear Friends,I have a RV082 VPN Router. But my internet connection is ADSL brodband. How can i connect and setup a VPN connection to other RV082Regards,Jinto Antony                  

HI, I'm new to forum and CiscoI run 2 RV042 V1 for home and office with Gateway to Gateway VPN connection with single WAN connection in use. Everything works like a charm!I was even able to create VPN connection with 2 WAN connection on one Router an...

Hi,I'm using SRP527W router at the moment and there are 10 PCs in the office.First of all, I'm not expert on network administration at all.Anyway, I set up remote access for particular PC and it works good.I made it like this.   Add "Port Forwarding ...

  I'm use this router as a main router as my WISP connections. ISP assigned static. RV042 is in Gateway Mode. I have a static from the ISP with DNS'sEverything is working. I request from some clients that want to connect DVR's and IP Camera's.DVR's a...