04-27-2007 04:21 AM - edited 03-03-2019 04:44 PM
Hi ,
I have congfired a access-list on my Internet router 3845 as attached to block ports 1720 & 5060 , but when i apply it on the intended interface the BGP state goes down.Is my configuration correct ? Also suggest .
Solved! Go to Solution.
04-27-2007 04:25 AM
Hi there,
BGP uses TCP port 179, accordingly you must permit it on your access-list, and don't forget the access-list has an implicit deny in the end, so you should add permit ip any any at the end of your ACL after denying what you want to deny to permit the rest of the traffic.
HTH, please rate if it does help,
Mohammed Mahmoud.
04-27-2007 04:25 AM
Hi there,
BGP uses TCP port 179, accordingly you must permit it on your access-list, and don't forget the access-list has an implicit deny in the end, so you should add permit ip any any at the end of your ACL after denying what you want to deny to permit the rest of the traffic.
HTH, please rate if it does help,
Mohammed Mahmoud.
04-27-2007 04:33 AM
Your access-list does not carry any permit statemets.
include access-list 102 permit ip any any and check
HTH,
Narayan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide