Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 

Routing

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

Don't miss this Cisco Catalyst 8000 offer

 
Labels

Forum Posts

Start a conversation

Resolved! NAT in 878 G:SHDSL

Hi all,my 878 router is connected to a SHDSL line 2M/2M. My pc is connected to f0 port and the router has assigned me an ip address (10.1.1.2). I can ping to any ip addres successfully but I can not surf the net.CPE#ping 66.249.92.104Type escape sequ...

Resolved! shaping on ES20+ with service instance

Hi all,i try to apply a service policy with shaping on a service instance under a gigabit interface of a es20+ on a 7600-SUP720-PFC3BXL (12.2.SRD4)This is the service policy:policy-map 200Mshape  class class-default    shape average 200000000and this...

fedcre by • Level 1
  • 702 Views
  • 2 replies
  • 0 Helpful votes

subinterface on ISDN port

Dear Friends,I have a customer who is having an mpls-vpn connectivity in Hub-spoke topology .His HO is having seperate internet connectivity as well.Now one of his spoke site wanted to access Internet through Hub site(HO)using same last mile he is us...

Bridge help, please

Hi,I want to setup a transparent bridge between c805 (IOS 12.3) and c2503 (IOS 11.1).The members of bridge would be: eth0 and serial0 interfaces.I want to bridge IP protocol.Is that possible?I tried to config it without cuccess.TIA,

Help with shape command MQC

HiOk. Here's the deal. I want to shape traffic using the shape command on a router, i might have very bursty traffic that will hammer the network for a small amount of time (30ms), and then be silent for a few seconds. This traffic doesn't depend on ...

golly_wog by • Level 1
  • 640 Views
  • 3 replies
  • 0 Helpful votes

Resolved! Port forwarding with single external IP

Hello gurus!Our educational agency has been running on a 6x T1 Internet access with a class C IP range (256 addresses). Each of our Internet facing servers had a static external address (~10 total) and everything worked hunky dory. The upper bodies t...

unicast storm.

Hello,I am experiencing strange behavior in my network. It occurs in Layer2 part of the network (it consists of Cisco 7600, 6500, 3560, 2960 and some wireless antennas). The MPLS and L3 part of network are fine. It seems that some packets are replica...

BVI interface giving drops on hardcode speed dulpex gi interface on 4500 switch

Hi guys ,I m facing drops while i hard code both links gi interfaces with 1000 full but with one line it works finealso it is working fine with both links on 100 half and auto configuration .here is the topology  -                           -gi0/0---...

Resolved! help eBGP ASN use for multiple location

Dear Experts,we have 4 byte ebgp ASN ( 123456)we have four own ip pools as per given bellow (e.g)110.231.70.0/2230.110.252.0/22220.220.129.0/25220.220.132.0/24at present all above pools are working at our HQ with same ASN (123456)now we are start int...

View All
Review Cisco Networking products for a $25 gift card