Routing

1. Please does keep alife work on physical inteface. I have two links to branch router, I notice if I pass the static routes through physical interface,the links wont fail over,but if I use tunnel,they will.2.what command can i use to know when last ...

Upgraded Frac T1 from 768 to full T1 1544.Sub interface shows 768k.The main interface shows 1536. Any suggestions on how to verify actual bandwidth so I can go back to the Telco Provider and make them fix? Thanks in advance. interface Serial0/3/0 no...

We currently have two ISPs that we BGP peer with and before this last weekend this wasn't an issue.This past weekend we swapped our primary and secondary ISPs. We also changed from VRRP to HSRP (not an issue).I thought I configured the routers proper...

Hi,Our router (integrated services 2811) PAT to a single sub net. We have a web server located on the sub net.When using public DNS from a computer on the LAN (other than the web server) we obviously get the public IP address for our website. This r...

Will a WIC-1DSU-T1-V1 work in a 2811 router or do I have to have the V2

I have 3 mb down and 1mg up internet connection I want to distribute the bandwith between 2 networks first 1 mb 512 k up and the second 2mb down 512 k upis there a cisco hardware product to do so ??

Hi ALL:When i am connnecting my laptop to the MUX ethernet prot i am getting the download speed of 450-500 KB/sBut when i am connecting the MUX to the 2800 router and then connecting my laptop to ethernet port of router i am only 230KB/s.While i am d...

Port A is connected to SW A, the port must waits for 16s before the interface begins forwarding. In MSTP environmentPls guide guru. i quite confuse on this. the default forward delay is 15, so can the asnwer looks like this ?spanning-tree mst forwa...

Dear allI have access server who many users connect to it. by the way all of users will be authenticated via cisco acs.I want to implement a solution to assign 64K bandwith to each user. I mean dedicatd bandwidth. I tried Class-map and police but the...

Hi,Can we configure HSRP in single router connected to Two l2 switches thro FA port.I need to monitor These two FA ports if one goes down another should come up and vice versa.

is there any way to find the IP address from the mac-address when the mac-address is 4 or 5 hops away from my router.

I have ethernet link from my two ISP and need to track both the ISP through Track command in HSRP configuration i need if i can track the reachability of any site via applying any rout map or something else and track it in my HSRP config.Please assis...

guys can someone recommand nice and short doco for multicasting as i have no clue of this topic.....and i want to get my head around it.

can u help me to configure inter vlan between a router and switch .