Connect two routers with HWIC-1ADSL modules

[glakovski]

Hello,

I couldn't find whether this module can be used as a central site DSL device(the client function is sure). This is needed to directly connect to Cisco router equipped with HWIC-1ADSL modules. I was using by now two Zyxel modems, but there is a difference between the two models (one of them is especially specified as a cetral side modem).

I will appreciate any answer!

[Giuseppe Larosa · Accepted solution]

Hello Georgi,

back to back connections are possible only with SDSL SHDSL modules.

All adsl modules are only capable to perform the client side role (ATU-R).

You need two network modules or VWICs for SDSL SHDSL

see

http://www.cisco.com/en/US/tech/tk175/tk274/technologies_configuration_example09186a0080135834.shtml

Hope to help

Giuseppe

[glakovski]

Thanks man,

useful information. I had some suspicions it is so...