09-26-2017 12:13 AM - edited 03-05-2019 09:11 AM
Hello,
i've configured a pseudowire-connection between two cisco 2811, to use some vlans on an other site. Connection works but i can only use 10% of the actual Bandwith. Something seems to slow down the pseudowire connection. Here's the related configuration:
Site1:
pseudowire-class wire1
encapsulation l2tpv3
protocol none
ip local interface FastEthernet0/0
interface FastEthernet0/1
no ip address
duplex auto
speed auto
xconnect 172.20.1.210 1 encapsulation l2tpv3 manual pw-class wire1
l2tp id 222 111
l2tp cookie local 4 54321
l2tp cookie remote 4 12345
l2tp hello l2tp-defaults
Site2:
pseudowire-class wire1
encapsulation l2tpv3
protocol none
ip local interface FastEthernet0/0
interface FastEthernet0/1
no ip address
duplex auto
speed auto
no cdp enable
xconnect 172.16.1.210 1 encapsulation l2tpv3 manual pw-class wire1
l2tp id 111 222
l2tp cookie local 4 12345
l2tp cookie remote 4 54321
l2tp hello l2tp-defaults
Between the two location there is a leased line with 50mbit troughput, but over the pseudowire, speed seems limited to 5Mbit. Any Ideas whats slowing down the l2tp connection?
Please forgive my poor english.
09-26-2017 12:21 AM
09-26-2017 05:42 AM
10-21-2017 05:49 AM
Hi, how did you remove the rate limit ? what configuration you did, i have the same issue
10-21-2017 05:50 AM
10-22-2017 11:50 PM - edited 10-22-2017 11:54 PM
I put that rate-limit to an interface years ago, to reduce traffic fom 10Mbit to 5Mbit. Then the connection was not used anymore. Nowadays someone needed a VLAN in an other location so, I activatet the connection. But in the meantime, the service provider speed up the leased line to 50Mbit, but over my pseudovire, there was still my rate-limit active.
interface FastEthernet0/0
rate-limit output 35000000 5000000 10000000 conform-action continue exceed-action drop
Now it's looks like that, so 35Mbit can be used. But if you did not configure a rate-limit like this, it'll not help you.
10-23-2017 01:37 AM
No rate limit in my case but any thanks for your clarification.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide