Storage Networking

Hi,I need some advice when it comes to how to setup a port-channel between Nexus 5548UP and a HP StoreVirtual 4330 device. The idea is to use 2 10 GB ports in a port-channel group and this far I've this on the port-channel group; interface port-chann...

I'm trying to pull fibre channel error statistic counters on a Nexus 5596 but it looks like the IF-MGMT mib is not implemented.If there any OIDs accessbale via SNMP to get the following values (Examples from show output in the CLI) via snmp?Input: di...

Hello Teamkickstart: version 4.2(7d)system:    version 4.2(7d)2011 Apr 14 18:03:43 jiph101f01 %RADIUS-3-RADIUS_ERROR_MESSAGE: All RADIUS servers failed to respond after retries.2011 Apr 14 18:03:45 jiph101f01 %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentic...

HiI have 2 cisco 5548UP in my test setup.I had earlier configured the sw for fcoe with an active zoneset with only the first 4 ports used as fcoe.I now plan to use the last 4 ports 1/32-1/28 as native fc.As a test I connected an 8gb cisco sfp tp port...

Hi All,I'm new to Cisco UCS and don't fully understand it's compatibility with non-Cisco gear. My questions are primarily driven around the concept that Cisco UCS smartplays appear to be significantly cheaper than the traditional configurations that ...

We are planning to decomission few of our unsupported storage arrays from environment.Hence we need to remove few zones from mds switch.I would like to ask that if i run no zone command e.g SW1(config)# no zone <zone names>would this be good to remov...

Just purchased a couple of 9216i for the lab.  I am looking to upgrade to 4.x  software.  However, whenever I try to upgrade I get the following error.  I can't got to this version.  Looking it up, it appears to be an incompatible software image.  Ac...

Is there any way to get Cisco FabricManager installed on a Windows Vista or Windows 7 64bit system?

Well there's two problems I'm currently having.1. Installing DCNM onto a windows 8 machine, I ran into a problem the 1st time I tried to install in that PostgreSQL doesn't like to be installed under program files in windows 8. It's a permission issue...

Hi Guys,I have to small fabrics (A and B), each one composed of two 9148, and each pair of 9148 is connected over the WAN over a trunk, for several times during the day both this links (one for fabric A and the other for fabric B) are having near 100...