01-29-2014 02:03 PM - edited 03-07-2019 05:53 PM
On a 3560X, 24-port, the first 24 ports are numbered 0/1 - 24, correct? For the optional Network/Service Module, are the 4 ports numbered 0/25 - 0/28? Thank you
Solved! Go to Solution.
01-29-2014 02:20 PM
Hi,
See this,
The uplink ports on the 10 Gigabit service module and on the 10 Gigabit Ethernet network module are labeled Te1/Gi2 and Te2/Gi4. These ports can operate at either 1 Gigabit per second or 10 Gigabits per second. They are identified in software as gigabitethernet x/1/2 and x/1/4 andtengigabitethernet x/1/1 and x/1/2, with x being the switch number on Catalyst 3750-X stacks. The Catalyst 3560-X switch port numbers are the same, with no switch number.
Hope this helps.
01-29-2014 02:20 PM
Hi,
See this,
The uplink ports on the 10 Gigabit service module and on the 10 Gigabit Ethernet network module are labeled Te1/Gi2 and Te2/Gi4. These ports can operate at either 1 Gigabit per second or 10 Gigabits per second. They are identified in software as gigabitethernet x/1/2 and x/1/4 andtengigabitethernet x/1/1 and x/1/2, with x being the switch number on Catalyst 3750-X stacks. The Catalyst 3560-X switch port numbers are the same, with no switch number.
Hope this helps.
01-30-2014 08:36 AM
Thanks Leo. I re-read and finally got it. I appreciate your assistance.
01-29-2014 02:51 PM
Hi Leo,
No TenGigabitEthernet SFPs; wish we did. For the 3560X with 4 1Gig SFPs, the port numbering would be 1/1, 1/2, 1/3, and 1/4? Thank you.
01-30-2014 09:36 AM
Hi,
Thanks, I'm glad I was able to help.
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide