05-02-2007 05:56 AM - edited 03-05-2019 03:48 PM
Hello,
I need to upgrade a Catalyst 4006 from CatOS to IOS.
I have some doubt.
Is it possible? Wich are the rquirements? Wich is the procedure? Any issues?
Thanks in advance
Enrico
Solved! Go to Solution.
05-02-2007 06:00 AM
Hi Enrico,
You cannot convert from CATOS to IOS on Cat4006.
SUP 1 & Sup 2 on Cat4000 switch only supports CATOS and NOT IOS.
HTH
Ankur
*PLs rate all helpfull post
05-02-2007 06:12 AM
Hi,
The Catalyst 4500/4000 Series Supervisor II-Plus, III, IV and V runs Cisco IOS? software only, and does not run Catalyst OS software. While Supervisor 1 and 2 runs only CatOS and can't be converted.
HTH, please rate if it does help,
Mohammed Mahmoud.
05-02-2007 06:00 AM
Hi Enrico,
You cannot convert from CATOS to IOS on Cat4006.
SUP 1 & Sup 2 on Cat4000 switch only supports CATOS and NOT IOS.
HTH
Ankur
*PLs rate all helpfull post
05-02-2007 06:12 AM
Hi,
The Catalyst 4500/4000 Series Supervisor II-Plus, III, IV and V runs Cisco IOS? software only, and does not run Catalyst OS software. While Supervisor 1 and 2 runs only CatOS and can't be converted.
HTH, please rate if it does help,
Mohammed Mahmoud.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide