I have a 3560 running 12.(46)SE and According to the configuration guide, the ip accounting is not supported. Is there any version that supports this feature?
Good Day,Does anyone know how I can delete a CV directory out of my Catalyst 4507 R-E bootflash directory? It has no files in it and I want to delete it but I keep getting error messages. Any assistance would be greatly appreciated.Greg
Hi allcan anyone tell me the most used commands on a cat 6500ie checking to make sure which cards are on line?system health check?how to see which cpu is active fan statuses etc ?
Hi,am planning to design an Local area Network in our company. I drafted an configuration for the core1 catalyst ( cisco catalyst 6509). Can someone check the configuration ? see the attachmentsThank you for you Help
HelloI used debug ip packet 1501. In access-list 1501 i have one of my externalip (EXTIP1). I received:May 18 09:44:52: IP: s=EXTIP1 (Vlan201), d=EXTIP2, len 84, input feature, Access List(21), rtype 0, forus FALSE, sendself FALSE, mtu 0sorry for dup...
From the 4510R/Sup5, I issued the "show mac-address-table" and saw a field "protocol", which included ip,ipx,others. What does it mean?P.S This switch acts as a pure layer2 switch only.
Hi Guys,i need some help, im trying to find open a port on the content switch 11501, commands as follows i have inputted below.service 1194-udp  ip address 10.178.237.110   protocol udp   port 1194   active  owner company content compa...
Hi! Sorry, I'm new to ASA 5500 series (ASA 5510) and I wonder is there a option to get DHCP work for set manually configured MAC->IP ? I mean, DHCP server lease specific IP to specific MAC? We must move from Novell BorderManager (old 3.6) to Cisco an...
Greetings!First of all, I'm not a cisco expert or anything. I'm a Virtualizaion Engeiner and currently we are working in desktop virtualization. We are having a problem with one client of ours. Our client buyed 7 thin clients (Jack Pc Efi 6900), whic...
Hi Guys,I have this problem.My setup is like this:router eigrp 5network 0.0.0.0 255.255.255.255no auto-sumWhen i do:ip route 10.5.1.0 255.255.255.0 null0this route gets redistributed int eigrpbut when i doip route 123.5.6.0 255.255.255.0 null0this is...
Hello,I'm looking for the CLI command to enable Port tracking Feature on my 3750 switch device. Y found it for MDS SAN devices but nothing about switch or router.The idea is to bring down an designated interface following the status of another one. t...
Here is the 3560 conf file:interface Vlan25 description Test ip address 192.168.25.1 255.255.255.0 ip helper-address 192.168.0.14...no ip forward-protocol udp tftpno ip forward-protocol udp tacacssw_core#sh ip interface vlan25 ... Vlan65 is up, lin...
Hi,what are the precautionary steps that need be taken before uploading the IOS for 4500 and what is the procedure to upgrade the IOS. And how to reload the slots with the new version of code individually.ThanksLogesh
hey all, current switches in stack are non-E version (WS-C3750G-24TS) and running c3750-advipservicesk9-mz.122-44.SE2.bin. We're adding E version switches (WS-C3750E-24TD) to the stack. We should be ok as long as all switches are running 12.2(44)SE2?...
Hello all. This is probably an easy fix, but i'm stumped.. I am running a 871W router in my lab, and the computer running the SDM had a hard drive failure. I have re-installed sdm, and all windows updates, HOWEVER, SDM will not launch, I get all the...
