Switching

Is there any difference in the follwing:IE Police vs Police CIRpolicy-map 1class 1police 8000ORpolicy-map 1class 1police cir 8000

Hi!,I'm designing a solution that requires VSS 1440 implementation. I have a Catalyst 6513 with line cards as follow:WS-X6066-SLB-APCWS-X6324-100FX-MMWS-X6348-RJ-45 WS-X6548-GE-TXWS-X6148-GE-TXI don't want replace these modules, but these modules don...

Hello,I am new to cisco routers and switches but i've been trying to find out how do i upgrade my cisco IOS on all of my routers.i have 3 cisco 2620 with IOS 12.1(5)T10 and 1 cisoc 3640 with IOS 12.1(5)T10i've been told that i need a cisco smartnet i...

192.168.136.15192.168.136.31192.168.136.63192.168.136.127what is the brodcast address of this interface if the show int fa0/0 showsinternet address 192.168.136.200.23 / 28can anyone explain pls Thanks

Hi,Any advice appreciated. I have a new un-configured - 'out of the box' 3750 switch. I want to add this switch to an existing switch stack. Is it as simple as just adding it to the bottom of the stack with the stackwise cables? will it then receive ...

Hi all, i could not trace out the issue of finding the module BF-S720-64MB-SP,MEM-MSFC2-512MB redundant supervisor engine

Hello all,Since I do not have access to the TAC, I figured the best place to tell Cisco about this problem is on here, please let me know if there is a better way to report bugs if you do not have TAC access.I searched the bug db but couldn't find an...

hi friends , I wrote an access-list that permit only 2 hosts from the specified network. and apply this list to interface inbound . the first host are accessible but the second not. Who can help me ?the list definition :ip access-list extended site2i...

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/ps5882/product_data_sheet0900aecd8016fa68_ps5854_Products_Data_Sheet.htmlAs per this link 2811 routers support 256 MB CF. I know the P/N for 128 CF and it is MEM2800-128CF. What is the Cisco P...

I have two Catalyst 2950 series. I just deleted the vlan.dat file and reloaded both of the switches. Now, when I try to configure the VTP domain on one of the switches in CLI, I am missing the "mode" option. I've enclosed a copy of the CLI from bot...

We are testing router with load of 50 Mb. i.e., router 2800 which is dropping packet when pinging to management interface. Whereas packet transferring and pc to pc ping is not getting dropped.