Switching

I wrote to memory so I would get a log entry and then I did show clock and the times do not match.....why would that be?here is the outputDec 4 14:42:21: %PFINIT-SW1_SP-5-CONFIG_SYNC: Sync'ing the startup configuration to the standby Router. 6509-VS...

I have a 3560G that is the def gw for most of my net, as well as root of Spanning Tree. All my sites connect into this box via fiber, most of the main servers plug into this box, as well as Unity and CCM, etc.Anyways, here is one port:interface Giga...

Good Morning, Trying to create a channel group to a UNIX box setup for server backups. Group sets up okay. SH Interface shows it to be a 2gb link. Problem is only getting 1gb throughput. UNIX has two (2) NICs with same MAC and IP, and here is the ...

Hi,I have the following problem.I have two 3560E switches connected to each other through a 6M leased line.I want to set up Qos which considers that 6M is the leased line speed.What I thought is:apply srr-queue bandwidth limit 10 on the egress interf...

Hi,I am new to QoS and would like to setup auto QoS between my site and another site. Below is what I intend to implement on my switch (Cisco 6506-e) SUP720. Is this good enough?switch(config)#mls qosswitch(config)#mls qos map cos-dscp 0 8 16 24 32 4...

Hi experts! I have a Switch Cisco WS-C6509-NEB-A and I need to do some test to proof redundancy between slots with the same kind of cards. I have 2 WS-SUP720-3B, 2 WS-X6516A-GBIC and 2 WS-X6148A-GE-TX:SW#show moduSW1#show moduleMod Ports Card Type ...

Having some issues with a simular setup:4 routers connected in series:RTR A >> RTR B >> RTR C >> RTR DHow do I only show the summary in RTR A routing table?------------RTR Afastethernet 0/1description link to RTR Bip address 10.1.1.1 255.255.255.252r...

I have a 2800 with 2 Ethernet interfaces. I have a stack of 3750s (layer 2) connecting to the 2800. I would like to connect both 2800 Ethernet interfaces to the 3750 stack for redundancy. 1 connection can be active while the other is a standby or ...

I have 2 Cisco 3825 routers with VWIC 2MFT-T1 cards along with VWIC 1MFT-T1 in NM-HDV slots in a test lab.Is there any way I can simulate/emulate a T1 environment between each router? I'm trying to learn how to setup DS-1 connections, bundle t1's etc...