Is there any document in cisco site regarding the number of users that can be put under same vlan..is ther any restrictions to the number of users in a vlan
Hi,Lastly receive an email from a customer request to upgrade their Catalyst 6506 IOS.Their Catalyst 6506 is using Supervisor Engine 720 with MSFC3,512MB DRAM and 64MB Flash,IOS is 12.2(17d)SXB1 IP only,CatOS is 7.7(1). They hope that upgrade IOS IP ...
Hello, I have the following issue with two switches connected through a 100Base-FX link. On one side there is a WS-C2950C-24 (fixed configuration switch with two native 100Base-FX ports) and on the other side there is a WS-C2960-24TC-L using a 100Ba...
We have set up all our Switches on a VTP domain but I want to be able to add new switches and to be able to use password. How can I go about doing this bearing in mind that I already have about 6 switches that are not using password? I want these to ...
we hv a network of 700 retailer connecting with router 2500 series now as it goes overload (CPU) user are auable to connect to the servers.plz suggest a better router that can afford shuch load n udp broadcast frequently. you may suggest out of sale ...
I used the Cisco Feature Navigator to find a Image for a cat 3750 that has SSH. it said to use 122-25.SEE2. So I downloaded c3750-ipservices-mz.122-25.SEE2. but the example configurations are not working for this switchs. Any suggestions?
hii....Is bootrom means EPROM & NVRAM means SRAM in cisco 8541 CSR-RP card.can ony tell me or any url link to find out the location of memory in card.ThanxManoj Jain
Good evening all,Have two 3750-12S, stacked. After configuring our 10th etherchannel group, all switch ports went down. Did not catch any messages pointing to issue.Very basic config for inter-vlan routing. One port from each switch in stack are gr...
Hello All,Need assistance, am trying to configure etherchannel between a Cisco3725 and Cisco Catalyst 3550. Can't get it working with my existing config below. Please help.Physical Connection3725 F0/0 ---> 3550 F0/13725 F0/1 ---> 3550 F0/2===== ROUTE...
