02-21-2007 08:27 AM - edited 03-05-2019 02:29 PM
I have a 2800 series router that I'm using for a frame router. it has 2 gigabit interfaces, but I cannot get the traffic to communicate across these two interfaces. it will ping the address of the interfaces but nothing beyond that
02-21-2007 08:40 PM
Hi
what do u mean by frame router here ? what you have configured in your interfaces ? also what you have connected onto those interfaces ?
regds
02-22-2007 09:21 AM
int g0/0 is connected to my wireless gateway device. int g0/1 is connected to a switch. I cannot ping beyond the interface address.
02-22-2007 09:34 AM
Hi,
Have you check routing properly?
Are you getting hit on the same interface?
You can check Hit by following command.
sh int gi0/1 | i input
Or send me you configuration and output of following command.
1)sh ip int brief
2) 3 times sh int gi0/0 and gi0/1
3) Show IP route
Regards,
Dharmesh Purohit
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide