Hi.our system is - Cisco Voice gateway - CUCM - Voice Recorder -FXO - cisco 3925 - cucm 8.6.2 -Voice recorder When we call outside to ip phone .ı couldn't see the caller id on the router and voice recorder.fxo - router -sip to voice recorder How c...
Forum Posts
Outgoing call from PSTN to CUCM is failHi All, i have a problem for incoming call from PSTN , But for outgoing call from cucm to PSNT is ok, i attach router gateway confguration & gateway confguration in cucm. the following description outgoing call ...
Dears:My company is using CUCM, CUC, IMP version 11.5SU8 as the IP PBX system and Jabber softphone solution. I recently discovered that Jabber login through MRA will display the wrong caller number. I have performed different dialing tests and presen...
While generating a CDR report for Trunk Utilization the below error appeared Please help the right steps to solve this issue. I think this issue started after upgrading from 11.5 SU3 to 11.5 SU8.
Resolved! Cisco phones Registration Rejected after changing the Starting and Ending Directory Number on cucm
I have 10 phones, some SCCP, and some SIP, different modal numbers, all registered and good to go. I changed the Starting and Ending Directory Number on the CUCM 10.5 and now no phones will register. I deleted the security settings and no joy. If I c...
Does anyone know if it is possible to set up a secure (SRTP) ad hoc conference using software media resources in CUCM?
In the Cisco "Jabber for Everyone" solution guide PDF from December 2019 (attached) there is a supported feature matrix that shows the Jabber Web SDK supporting Presence and instant messaging through Cisco Expressway as a feature of Mobile and Remote...
Hello,I run into a problem when I want to use Cisco Jabber from Internet through the ExpressWay infrastructure.The Expressway-E and Expressway-C don't display errors.I got "Can"t communicate with the server. Internal Server Error" on the phone. I fou...
Hi all, Jsut want to check something. I see in the guide here - https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/voi-ntwk-based.htmlThat it says Network-based recording is not supported for the following calls:Real...
Hi all, I would like to migrate from a old BE6K-ST-BDL-K9 with CUCM 9.1 to a new BE6M-M5-K9 or BE7M-M5-K9 cluster and I would like to mantain the licenses from my old cluster. Is that possible? I read that I can use PCD to migrate from one CUCM to an...
Hello We have a couple of products in our environment that we need to connect to via SIP trunk. Problem is, these products use UDP for SIP signalling. So the situation is that when I create a SIP trunk to a product that uses UDP for signalling, CUCM...
Hi, We notice this error "test - tomcat_sessions : Failed - The following web applications have an unusually large number of active sessions: _root. Please collect all of the Tomcat logs for root cause analysis: file get activelog tomcat/logs/* on on...
I configure ldap on both side CUCM & AD,CUCM synced all domain users but dose not show up them I made sure all users already exist on cucm but dose not show them up Need your help guys
Resolved! CUCM CLI "License" Option
Hello all,Does anyone know why the "license" command option is unavailable on CUCM CLI?I have 3 other instances of the same CUCM version and the "license" option is there except on one of them it is not. This is baffling me.Thank you!
