Is CUCM 11.5.1.16900-16 compatible with the following below? MCU 5320 – 4.5(1.98)VCSe/c – X8.7TMS – 15.5.0
Forum Posts
Resolved! Device Pack install for CUCM 9.1
We are finally getting ready to upgrade our old 9.1 CUCM to 12.5 but before the upgrade we wanted to install all the new phone firmware. I cannot however find any device packs on the Cisco download page for CUCM 9.1. Am I able to use the CUCM 12.5 ...
Resolved! UC Migration plan 12.5 - advise
Hi there, I am preparing a plan to migrate UC infrastructure from release 10.5to 12.5. Current systems are in BE6K and new UC will be in Be7K. I have been reading lots of documents for UCM, IM and P, CUC and PCD. But couldn't get a definite answer. C...
Resolved! Cisco Unity upgrade PCD vs direct ISO
We are upgrading our Cisco Unity from 10.5.2.16901-1 to 11.5.1.16900-16. Is it better to use Cisco PCD or just direct upgrade via CLI and ISO image? The Unity nodes are in different datacenter over WAN connection. Thanks
HelloWe are using NICE to record extensions that are configured in a line group, that a hunt pilot points to. Lets say the hunt pilot ext is 2000 and line group 2001 - 2010. The extensions 2001 - 2010 are configured in nice and mapped to channels. If...
Does anyone know how to change a voicemail greeting to closed greeting manually. We would like for our transportation department to be able to switch to either closed greeting or alternate greeting when we have weather related delay/closing. Currentl...
I have a cluster of one Publisher and three subscribers, the publisher and one subscriber is in one town and the two remaining subscribers are in a second town. one of the subs in the second town was turned off and the second sub went off line (not ...
Hi,I am trying to find out if Call Manager has any feature that would block a user from being able to register the phone when trying to connect from a specific IP range? I know this can be accomplished using access lists at the switch level or on th...
Hello Guys, We are upgrading the VMware on existing UCS "UCSC-C220-M3SBE" TRC 2 Current version of VMWare is ESXi 5.5.0,2068190with Datastore: VMFS5. Applications running on the servers are belowCUCM System version: 11.5.1.10000-6Cisco Unity Connect...
hi guys, can anyone guide me how to integrate a PBX solution with my existing CUCM server.I am new to voice technology and learning hands-on in company by managing it since we dont have a voice engineer.So here is the scenario:1) We have BE-6000-UCS-...
Anyone know where I can find the UUID for CUCM 8.6? I do not have PLM, so am working off CLI at the moment.
Hi all,We have a RightFax server configured and I can send the fax now. (using SR140, h323 GW configured point to voice gateway), but in the Fax Util, the fax is displayed as Sending Error and the history shows this message: "Resulting status code (0...
Hello Cisco Team, We already have Call Manager Publisher ,Subscriber(Version 12.5),Unity Publisher ,Subscriber (Version 12.5) in our network.We use Unity for Playing the greetings messages for inbound calls In this topology we planning to add Cisco ...
@lindborg I'm getting an error trying to use COBRAS to backup an Unrestricted mode Unity Connection with COBRAS. The user has a mailbox and the following roles in Unity Connection: Mailbox Access Delegate Account Remote Administrator System Admi...
I have a Cisco Prime Collaboration Provisioning version 12.6 and I need to add LDAP server, in order to import users from it. I have successfully added Call Manager, UNITY, and IMP, but when I add LDAP server it shows me that credentials or admin Dis...
