11-25-2013 12:42 PM - edited 03-01-2019 11:22 AM
Newbie question.. but how do I set the time in CIMC?
Solved! Go to Solution.
11-25-2013 02:46 PM
Hi Brett,
The CIMC grabs it's time from BIOS. If you want to change the time you would have to get into the bios and change the time there.
11-26-2013 08:57 AM
What type of server do you have?
Is it a c-series server?
To get into the bios you will have to reboot your server, and preset F2 when a little bit after you see the cisco logo.
11-25-2013 02:46 PM
Hi Brett,
The CIMC grabs it's time from BIOS. If you want to change the time you would have to get into the bios and change the time there.
11-25-2013 05:06 PM
Hi Brett,
Please let me know if this is what you were looknig for.
11-26-2013 05:10 AM
Thank you Manuel.
Is there any other way? I am very new to these Cisco UCS' and not really sure how I would access the BIOS.
11-26-2013 08:57 AM
What type of server do you have?
Is it a c-series server?
To get into the bios you will have to reboot your server, and preset F2 when a little bit after you see the cisco logo.
11-26-2013 10:04 AM
Thank you Manuel. Worked like a charm.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide