Please let me know how to configure a firewall port where a network switch port that has a VLAN configuration (trunk mode) is connected.Thank you in advance!Regards,Sangyeon
Hi,I'll have two Firepower FPR1120-ASA-K9 that will be configured as High Availability (Active and Standby).Please let me know if they should have the same management IP address and bridged network address.Thank you in advance!Regards,Sangyeon
Hi,Please let me know what kind of default or optional settings on 9000 series switches are provided to protect from the DDos attacks.Regards,Sangyeon Ham
Hi all,Please let me know if the management port on C9200L switch can be used for remote access to change the configuration, SIEM server interface to forward syslog in the network switch, and NTP server interface for the time synchronization. The rem...
Hi BB,Thank you for your reply! Actually, there are four network switches. Two switches are in the inside network, and two switches are in the outside network. Two switches in the outside network have vlan 10, 20, and 30. One of two switches in the i...
Hi MHM,Thank you for your reply! Actually, there are four network switches. Two switches are in the inside network, and two switches are in the outside network. Two switches in the outside network have vlan 10, 20, and 30. One of two switches in the ...
Hi M,Thank you for your reply! How about using one of RJ45 spare ports for remote access to change the configuration, SIEM server interface to forward syslog in the network switch, and NTP server interface for the time synchronization? I think it wou...
