Thomas,After configuring ip routing in the switch.You need to route vlan 2 and vlan 3 in the router.You may use either static route or any routing protocols.So when the laptop reaches it's gateway.It will come to know where vlan 2 & 3 are situated.Al...
Tuvshuu::config-register (0xC502) meansC- 15th and 14th bit set14th-IP broadcasts do not have network numbers15th-Enable diagnostic messages and ignore NVRAM contents 5- 8th & 10th bit set 8th-Break disabled10th-IP broadcast with all zeros0-2-Bo...
