Outbound caller id on T1 CAS

[sorinbadea]

I have a T1 CAS, used for outbound voice long distance calls on a 2811 cisco router. Is it possible to broadcast one main phone number for any outbound calls?

[Manish Prasad]

Yes  , use voice translation rule on the router and apply it to calling number on outbound dial-peer.

Here is a link...

http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/61083-voice-transla-rules.html

Thanks

Manish

[sorinbadea]

Tried but no luck. Most likely the telecom company is blocking it.

[Manish Prasad]

If you have correctly configured calling number translation and applied it to right dial-peer and in "debug isdn q931" logs you can see correct calling number (as desired) but can’t see on remote user phone then it’s a provider issue , you need to talk with them.

Rate all helpful post

Thanks

Manish