VPN

Hi,It's possible to configure ASA on 8.2.3 release that I have dedicated IP address just for a S2S and RA VPN?This dedicated IP address is from a pool of outside interface.Kamil

Hello,I'm a novice admin for Cisco VPN 3005 concentrator. How do I setup a Active Directory authentication so that remote users are authenticated and login scripts are executed?Can this be authenticated to Windows Server 2008 R2?Client: XP SP2/SP3Tha...

Cisco 2811 VPNI have previously posted this question but somehow it ended up being marked as answered!! so here goes again.I have a Cisco 2811 Router with 3 ADSL WAN Wic’s.I  have a number of remote sites that I want to setup via a site to site  VPN...

Help!As of earlier today, I have a l2l vpn configured between the main office and a small remote office. The tunnel is active, and I can successfully ping devices on either side of the tunnel. I am also able to to do DNS name queries against the name...

I have been trying to figure something out.  Lets say you have one ASA that is terminating both clientless SSL vpn, and site to site/remote access ipsec vpns.  Is it possible to allow clientless webvpn users access to resources at the end of the ipse...

Did Verizon DSL (East coast / USA) change VPN practices or filtering today?We have 4 site-to-site IPSec VPN tunnels up all the time, and today our tunnel to a Verizon DSL endpoint (ASA-5505) will not connect!  This is very frustrating.  Of course Ver...

Hi all,I'l start with saying what I've currently got set up.We currently have a SA 520 set up in a control center with 3 remote VPNs set up to external networks so that a Database in the control center can share data with the databases on the 3 exter...

Hello folks,              Does anyone know how to setup a router to advertise FQDN over IPSEC tunnel and what protocol & ports needs to be opened in the VPN ACL.Help would be really appreciated.Thanks in advance.

Hi,I've seen several people ask this here, but no definitive answers. I would like to be able to allow only certain IP Adds to initiate a remote access VPN to a certain group.For example:IP-Prefix A is allowed to initiate (and connect) to tunnel-grou...

We are facing problem while access a link through clientless VPN. It shows connection error “Server Unavailable”. This link is perfectly working directly.ASA Version 8.2

Does anyone know if the Cisco ASA 5500 series can produce a session timer for users on portal page? We transitioned from a Juniper AS4000 that does support this. I have programmed a max connect time and idle timeout, however our end client wants the ...

Hello all,I have 2 SR520's with a hardware VPN established. I have Windows XP Machines that work great in this setup, however, Windows 7 Machines aren't able to browse to all sites on the internet (i.e. Yahoo, Newegg, MSNBC, and others). The interest...

Hi ,I am not able to establish l2tp/ipsec connection from windows 2008 to asa 5510. I tested it from one client which is not behind NAT and I am getting following error(s):3    07:45:46    Jul 08 2010    713048                    IP = 62.99.XXX.XXX, ...