VPN

I am replacing a 3015 concentrator with a 2801 sec-bundle router.     The public interface of the concentrator sits in the 'public dmz' of our ASA.  The private interface of the concentrator sits in an internal dmz on of the ASA.     I currently have...

I have a primary MPLS router doing HSRP with an 1841. The 1841 has an HWIC-3G-CDMA-V that I am using for the internet connection. I really only need to create a tunnel from the 1841 to the ASA at my Hub. The problem is that the cellular call is dropp...

Hi all,i have the evaluation ACS 5.0 version installed and have an issue with the local certificate.I want not use a self signed certificate but a company certificate.I did the following steps :1. In System Administration/Local Server Certificate/Loc...

Hello,I am in the process of preparing to upgrade our ASA to software 8.x to add support for the Anyconnect client, as we are looking to provide VPN connectivity for Win7 and 64 bit computers.I have two questions.1. I want to know if we will still be...

I am creating a VPN network of  7 ASA5505 s.    One device is the central or hub device.( Attachmnent  Main5505)All ASA5505 devices running  ver   7.2(4)there will be site to site tunnels to 6 other 5505 s across the internet. Currently there are 4 o...

Hello all,We were able to establish a VPN connection from our ASA 5510 to a Windows XP laptop using the VPN Client. However, when we tried accessing the internet or any of the files from our network, the request could not be found. We tried pinging d...

I've got a site to site ipsec vpn setup between myself and a nother location. At my site is a Cisco 877-M at the other site is ISA Server 2006.The ipsec to site2 is up and I can ping machines on the LAN in both directions.At my site port 80 is forwar...

I cannot even see my customer connecting to the line,router info3845IOS c3825-ipbasek9-mz.124-8c.binline 1/6 session-timeout 20   no exec-banner exec-timeout 0 0 modem InOut autocommand  telnet 192.168.80.2 1389 terminal-type vt100 no exec transport ...

Hi all!I’m trying to configure DHCP for an IPSec VPN on an ASA5510 8.2(1), but just can’t get it to work.On the same ASA5510, I have about 20 working IPSec peers, using either EasyVPN (with nem) or local pool addresses. The new tunnel -group I’m conf...

HiI am bit new to this and have a question about a new VPN link I have been asked to set up.I need to set up a VPN link to a remote company which is fine. This link then needs to be passed down to a certain location in our building only for a certain...

I'm using the cisco anyconnect client and when forming a connection I recieve "unable to establish vpn". However, the ASA shows me being authentacted to the Clientless portion of the ssl VPN. The command I'm running is show vpn-sessiondb webvpn (show...

HiAfter setting up an L2L VPN between an ASA 5505 and Cisco 3825, I'm not able to ping the inside network.My network for the ASA is 172.28.45.0/24 and for the 3825 is 172.28.53.0/24. I've been told that there may be overlapping in the ACL and all.But...

We have recently moved encryption to the Application Layer of our network, this was a business requirement for other reasons. But from the network department we see this as an opportunity to increase the scalablity and longevity of our routers.We are...