VPN

I just picked up a Windows 7 64-bit machine and have made the same discovery as many that Cisco won't support older device connectivity on a 64-bit platform.  I've learned about the Shrew Soft client and have installed it and it appears to work fine ...

I have a local ip pool setup on my asa for vpn users and I have the following line:  vpn-addr-assign local reuse-delay 5 which I thought would allow the reuse of an ip after 5 minutes.  it appears this is not happening as when users disconnect their ...

HI ALL,Kindly advice the below error getting the crypto enabled interface .#send errors 0, #recv errors 117--------------remote side errorVPNB#sh crypto ipsec sa peer x.x.x.xinterface: GigabitEthernet0/1   current_peer x.x.x.x port 500     PERMIT, fl...

Hi,I have 2 5540's with 2500 SSL VPN licenses each. I anticipate around 3000 concurrent users and thus am planning to use the built in load balancing. However, I am unsure how to handle IP assignment. I had planned on using an internal pool for IP...

Hello,I have a quesion concerning, the set up of VPN IPSEC using certificate for authentication not pre-shared key. The situation is that you have generated a  rsa key, then a csr, which has been signed by a CA. You have installed the root and identi...

So I have a cisco ASA acting as a hub, and 2 additional ASA connecting to it. Problem is I have issue with the spokes accessing each other.  The issue is spoke A cannot access spoke B, but spoke B can access spoke A.  If spoke B initiates the connect...

HiI am trying to set up a PPTP connection and in whole of cisco site, it only talks about PPTP Server side configuration.Can Cisco devices serve as PPTP client at all?? If so can someone please point me to configuration tasks.Thank You!

I recently bought a new laptop with Windows 7 Professional (32-bit). I installed the Cisco VPN client 5.0 to connect to my employers network. I noticed after I establish the VPN connection I can only access resources within my work subnet. For instan...

Hi,Using the help file I have been able to force a DAP to check for the existance of an AV program...assert( function()    for k,v in pairs(endpoint.av) do        if (EVAL(v.exists, "EQ", "true", "string")) then            return CheckAndMsg(false, "...

Hi there,I am having some trouble. I am using Cisco AnyConnect VPN Client version 2.3.2016. I am running Windows 7 64-bit.With most available WiFi connections I am able to connect to the vpn and access web or mail easily with out any problems. Howeve...

Hi all,Im trying a GETVPN/DMVPN setup with two KeyServers and two DMVPN Hubs.(And a few spokes for testing).Having the setup all up and running it works fine. The two GET-Keyservers are configured as per. Cisco guide,and they are setup with a primary...

Hi All,We have a Cisco VPN to a client system. We are able to connect to the VPN of the client system successfully. However we are not able to access any IP from the remote Network. We tried to ping the default gateway and this also times out. I am a...