VPN

Hello everyone,Is it possible to create a site to site VPN tunnel between 2 ASA5505s and then create a Remote VPN server on one of them so that remote VPN users can connect to the LAN at the other end of the tunnel (local net access will I imagine be...

Hi Experts,I have a peculiar problem. the scenario is this. I am building two different VPN tunnels from two different Accenture Locations to my client's network. Both the VPN Tunnels are terminated in the same ASA 5520 at the Client end. The source ...

Hello Experts,Is there any solution, that I could use the Cisco Anyconnect with my existing VPN Concentrator 3000? The motto behind it is since the Windows Vista 64 bit is not supporting VPN Client software, so was looking at Anyconnect, but document...

I have a cisco ASA5520 using Client 5.05. I currently am using the public ip address under the hostname and everything works fine. I created a dns name with my isp and let it populate and it does not work. It does not even hit the asa. I checked on d...

I have an ASA 5505 that is causing me some issues. I set up ssh on the ASA and had it working. I then shipped it to the customer and the ssh no longer works. I have SSH wide open right now. I have also zeriozed the key and regenerated the key and...

hi all, I got stuck in configuring Cisco ASA for site-site vpn with both peers having Dynamic IP.I cannot configure the peer identity as hostname through asdm.eg:abc.selfip.com . I checked in the NetPro also, but I didn't get any satisfactory e...

Pc can connection the ASA by vpn.but only can send packet,don't receive packet,on the ASA,the display sho cry ipsec sa only encrypted,none decrypted.Have somebody resolution this question?thanks a lot!

can i configure Cisco1841 as an easy vpn server and non IOS vpn device at the other end. i am trying to setup vpn tunnels from cisco vpn client and non cisco vpn devices.thank you.

Hi we have configured a LAN-LAN ipsec VPN between Checkpoint and PIX. We have not natted our end LAN with any IP. But on PIX its observed that tunnel is getting formed with LAN as well as with the peer IP. We see two assosiations happening and we can...

HiI'm trying to create a VPN between a remote 857 and a UC520 using EZVPN. UC520 is set up just fine and tested OK using the VPN client. However the 857 always fails asking for Xauth credentials stating they are incorrect. Have tried completely wi...

I have an obscure problem. I have an ASA 5510 as the hub device in my network with 33 spoke nodes. The spokes are a mix of 2821 and 2651 routers. My network is fully meshed (to support site-to-site VOIP). I use IPSEC (L2TP) tunnels and “hair ...

I am having an issue with a windows vista ultimate laptop (32bit). I have thevpn client version 5.0.03.0560 installed and using ipsec. The client successfullyconnects and is authenticated. It gets an internal IP address from the vpn ip pool. When...