VPN

Hi,We would like to monitor couple of ezvpn client traffic. The client got 5505 ASAs. Monitoring system can reach ASA via SNMP but the listing only Vlan1 & Vlan2 as resources. How can I get the 8ethernet switch ports (from te ASA 5505) listed so that...

HiPlease can somebody highlight as to why I shall use ASA appliance for VPN tunnels rather than using any Cisco IOS appliance that supports VPN ?which one is preferred and whyThanks

Hi,I would like to know if it's possible after a user has loggued in the WebVPN Portal to restrict his access to only the portal. For example if the user open a new tab or new window and try to access google.com, it's not working.Any ideas?With the A...

I am configuring SSL VPN for the first time. I am able to connect to ASA SSL VPN from outside machine but it is unable to access local resource. Nothing is shown in traceroute. Only able to ping outside interface i.e VPN Server. Attached is the confi...

On an ASA 5505, Does the vpn-idle-timeout value in the default group policy apply to L2L tunnel groups?As far as I knew, this parameter was only used for remote-access VPN configurations but since L2L tunnel groups reference this group policy by defa...

Hi, I've configured two IPsec VPN, one site to site VPN between two routers cisco 2811 and the other between one of the routers and a VPN Cisco Client. But, I have one problem. If I add the command for the VPN Cisco Client: crypto map IPSEC_VPN clien...

We are unable to access a specific site online. Disabling websense does not resolve the problem so it's not it, it looks like it's the firewall.packet-trace shows everything is ALLOW.The only I do see is that we have a vpn peer to address where the ...

I have two 506 PIX and I am attempting to get a Site-to-site VPN tunnel working. The main site has a static IPremote site is DHCPNow I have the site to site tunnel working with a static config at the main site. The problem I am running into is the re...

Hi all,We tried to configure a router as server for a client VPN . We applied the crypto map on a loopback interface.we put "crypto map VpnConn local-address Loopback0".We can connect using a cisco VPN client but we cannot ping the LAN, even the ip a...

I have a remote access vpn configured on my ASA 5520 and now I need a Lan-to-Lan vpn, can exist a Site-to-site Vpn and a Remote Access together on the same ASA?Does anybody have a sample configuration of this mix vpn access? Thanks

Is anyone out there using the AnyConnect mobile? We are trying to do a pilot with some Symbol handhelds but our ASA devices has this line "AnyConnect for Mobile : Disabled. Do I habve to have a license to use this functionality? We are currently u...

Hi,Is there any difference between how PIX handles traffic inspection and ASA handles traffic inspection?If yes please share experience.any link on cisco.com.Thanks in advancesubodh

I am setting up an EzVPN connection from an 1811 router to my ASA 5540. I have everything setup and working properly with the exception of xauth.I haven't had this problem with my VPN concentrator, and the configurations on the client side are identi...