VPN

Hi,We have several EZVPN clients connecting to a ASA server. The remote hosts can access all devices behind the ASA. I have added filters to user profile and group polies but they dont work. Here is partial configuration from the ASA:object-group net...

Hi,I was following the below doc to configure basic l2tp access for win XP default vpn network connection:http://cisco.com/en/US/docs/security/asa/asa80/configuration/guide/l2tp_ips.htmll2tp config lines:ip local pool MS-POOL 192.168.22.90-192.168.22...

I have 5 ASA5505 connecting to a ASA5510. When creating the crypto map and tunnel-group on the ASA 5505's can I reference a DNS name instead of an IP address?

Hi,I have an annoying problem. I have a Cisco 871W router with a VPN tunnel to another location that works fine. If the tunnel is up, UMA enabled phones won't work on the connection and the router will log this error:*Mar 29 01:44:37.791: %CRYPTO-4...

RAM memory is showing 202 Mb only

Dear all,in my H.O i have a 2801 with VWIC2-1MFT E1/T1 and i have an E1 leased connection which is 2.048Mb, and at the branch sidei have 1841 and ISDN BRI card and my ISDN BRI connection is ready at remote branchi need to connect between these 2 offi...

Hi,I am trying to set-up ezvpn between a 881W(client) and and ASA5510 (server). The setup works correctly if the 881W is directly connected to the ISP. But I need to connect it behind a ASA5505 with NAT. This way the VPN do not mount.In the ASA5510 (...

Hi,My issue:On WAN we need to give priority some traffic (say RDP andvoice ) and other default traffic should not be prioritized When I apply the service policy on the tunnel. I get thebelow error.PDM_CORP_MPLS_RTR01(config-if)#service-policy outputt...

Hi Team,I am trying to setup the Cisco IOS SSL to support Anyconnect client.Much as I have entered all the required commands, the configuration doesn't work. My IOS is (C2800NM-ADVIPSERVICESK9-M), Version 12.4(22)T.I would appreciate if any in this t...

I am having an issue getting Citix clients to connect via VPN. This is a new turn up, I had a PIX 501 yesterday morning and everything was fine but 18 devices and only 10 licenses, so I had CAL issues and dropped this in as a "quick fix". I can ping ...

Hi all,I've got a one person office using an ASA5505 in NEM. This ASA5505 connects to an ASA5520 at the office. My understanding is that I should be able to connect to any device on the LAN side of the ASA5505 from the LAN side of the ASA5520. I am n...