VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

I believe the answer to my question is "It can't be done". However, Cisco VPN has evolved a bit since I worked with their newer stuff. So, here goes the question.We have a few hundred remote-access users who use the Cisco VPN Client installed on thei...

pkapoor by Level 3
  • 680 Views
  • 3 replies
  • 0 Helpful votes

dear all,site 2 site vpn configued on 1811, crypto map policy with md5 hasing is configured, i want to configure it as remote vpn also. is it possible to configure both on single interface . i heard that remote vpn only supports SHA algo. do i have t...

ammadshah by Level 1
  • 275 Views
  • 1 replies
  • 0 Helpful votes

Hi,Recently i was configured my C7206 (IOS 12.4.10a) to remote router C2801 (IOS 12.4.9.T1) with ipsec configured via leased line. All the application are working fine if i configured the encryption using DES. However, when i configured the encrytion...

Hello, Is it possible to setup Cisco IOS Easy VPN Remote Client Mode with Split Tunneling using a single interface connected to the outside internet. I tried using a loopback interface but it doesn't seem to work. Has anyone tried this or has a...

Can someone help on this DSL dail(BT DataStream) problem?bellow is info from PE(Cisco 10k). Always stuck in LCP_NEGOTIATION. PV and VC built ok I believe. SP also checked Line is OK.dsl-PE#ping atm int atm 3/0/0.9 9 32Type escape sequence to abort.Se...

kevin.shi by Level 1
  • 529 Views
  • 1 replies
  • 0 Helpful votes

Ok, so we've successfully setup VPN with our PIX, and we even have it authenticating to an Active Directory server via IAS. All works perfectly, except once the client is connect, it cannot see anything on the internal network. We try to browse net...

I am attempting to connect to my business pc, via XP Remote Desktop, from another computer - in a different location. Connecting to the pc with XP Remote Desktop is no problem, but when I then try to start my VPN Client (Client vs. 4.0.4 & Client Typ...

support by Level 1
  • 724 Views
  • 2 replies
  • 0 Helpful votes

This Is my networkHTTP SERVER -10.10.X.X:8080||PIX FIREWALL|192.168.100.X/24|1811-ROUTER1Permit ip 10.10.x.x 0.0.0.255 192.168.200.x 0.0.0.255|IPSEC 192.168.150.X|1811-ROUTER2Permit ip 192.168.200.x 0.0.0.255 10.10.x.x 0.0.0.255||192.168.200.X/24Whic...

vaba by Level 1
  • 502 Views
  • 3 replies
  • 0 Helpful votes