VPN

Greetings to allI am trying to use DDR to backup an ADSL line with an ISDN using the backup interface method.When the primary connection goes down (I pull out the cable), the backup interface is brought up but I cannot route interesting traffic to ma...

Hi, I was wondering if it's possible to use the easy vpn client on an asa 5510, and I want 3 networks behind the asa to be able to send traffic thru the tunnel.Here is what the Network would look like:VPN 3005 (server) - Internet - ASA 5510 - switch/...

Hi,Are there any restrictions in setting up an IPSEC VPN inside a MPLS VPN? Put simply the IPSEC peers are connected by an MPLS cloud.Assume that there are no restrictions on IPSEC traffic inside the cloud.RegardsED

We have configure a Lan-to-lan IPsec connexion using digital certificate between a VPN Cisco 3000 and a Nortel Contivity.We have test with success the configuration on both side and we have try to replicate this in production environment.But the tunn...

Hello all,i have plan to implement encryption between my h.o and branches. rt now its working with point to point leased lines.i have 5 branches. if i want to encrypt the traffic between h.o to branches is that ok if i put one 515E at H.o side and ...

How many crypto maps can I apply to a single dialer interface. I have single 871 router with a pppoe connection to the ISP on it's dialer 1 interface. This same router will connected to 4 other networks behind their own 871 router with each of thei...

I have an 828 router working nicely on a SHDSL 1.5/1.5 connection and providing NAT for browsing etc for a small LAN, and for that it seems to work fine. The problem arrises when I try publishing services with port forwarding.Once I have enabled a p...

We've recently gotten an ASA 5510 and I'm trying to configure it to support remote access via using L2TP over IPsec, so our remote Windows XP users can just use the built-in Windows XP VPN client. Our ASA 5510 is running version 7.2(1) with the 5.2(1...

It appears that to authenticate a user connecting via remote vpn to AD is to use MS IAS (radius). I have enabled IAS on the DC, created the radius client (ASA 5510) and successfully tested a connection in the ASDM. I have a few questions/issues tho...

Hi,My routers at two different sites are connected through GRE tunnels. I want to configure IPSec over it, but throug easy vpn server and client setup. Is it possible. Apparently the most reasonable configuration for the mentioned scenario is site-to...

I have a VPN established with 4 routers (2x 837, 2x 857) connecting to a 2628 router (hub). All but 1 connects, the 1 that does not connect has the same configuration as the other router that can make a connection. Like to know if there are a set o...

HiI'm setting up a site to site VPN between 2 new devices (ASA 5100 and PIX 501). I've been thru the wizards on both devices but cannot get IP traffic between them. Any help would be greatly appreciatedThanks Rex

All,Please find attached the diagram and HUB /SPOKE configs I am using to get spoke to spoke communication via the VPN hub.The VPN is functioning correctly between the hub and spokes just not between the 2 spokes! please help!

I have a PDA i-mate, i want to connect to my LAN services through vpn to our PIX 6.3, can any one tell me how to do that using PPTP? how the setup on my pix should look?