VPN

HI! i need help fast!!! how can i connect to a 2520 router console and with what program and settings! i have the cable, but nothing is showing up under hyper terminal!! thx!

Does anyone know how to connect 2600 ADSL WIC to 2600 ADSL WIC without going through DSLAM? or this is not possible? thanks

How do I restrict a VPN client users access to only one IP. I created an access-list and applied it to the inside interface, but it does not restrict the access.

We have an 871 configured as an Ezvpn client in network extention mode. We have outbound shaping and QOS applied to the virtual-template interface to prioritize voice and all that is working great.The problem is that from the 871 itself I cannot pin...

Hello Cisco team,I would like to query please if Cisco will be venturing down the path of catering for PKI for both SSL / IPSec VPN's for both validation & authentication. Questions as follows :1. Is there any plan to have PKI used in Phase 1 for ...

Hi,I am on a Vlan, trying to connect to another Vlan though a router, but coulndt establish any connections, what might seem to be a probelm

Hi!Discover a problem implementing dialin access with wic-2am on cisco 2811. Plugged in 2 wic-2am= card to slot 0/1 and slot 0/3 on the router. But during test only port 0/1/0 and 0/3/1 can be utilized. The other 2 ports, 0/1/1 and 0/3/0 wont accept ...

I have a 501 behind a 678 (CBOS 2.4.6) The 678 does not allow inbound connection by default. How can I config the 678 to simply terminate the ADSL and allow all traffic both in and out, so that I can let the 501 do all the access control?

I was curious if it is possible to have myself and another user on VPN to the companies network and then have myself connect to the second user with Remote Assitance. We tested this in the office the other day using both the windows & Cisco VPN clien...

I have a network divided in two locations.In Primary location I have a 1841 router and Pix 515e both parallely conneced to ISP router behind 515e and 1841 router i have 4 servers having Public IP's the issue is when i access these servers from my rem...

Hi guys/gals,Im setting up a dial-up to router aux portI just bought a DLINK-562E External Modem with Serial Output, I tried to connect to the DB9 cisco console cable but cant seem to make it work,I got the config for my aux,line aux 0modem DialInmod...

I have PIX506 & PIX515's configured as a VPN server but when I connect using the VPN client, I can't telnet or SSH into the PIX itself. Is there a way around this? I hate having to RDP into one of the systems on the LAN and telnet to the PIX from th...

I have configured a client to PIX VPN for PIX 515 E and authentication is being done by ACS (TACACS+) server.I am able to connect to VPN (getting the IP from VPN pool given in PIX)but i am not able to access any LAN system while ACS server is in LAN ...

Hello, We are connecting to a 3rd party VPN using the CISCO vpn client 4.6. We have the client setting unchecked "for allow local lan access." Currently, we are getting split tunneling where our VPN is gateway connecting both our networks. This i...

Hello,I have an ASA that I would like to configure as a remote access VPN solution for multiple clients. I want different clients to VPN in and, depending on their IP pool issued by ACS, be allowed access only to certain networks. The problem arises ...