VPN

I have PIX IPSec VPN to Checkpoint sample config from Cisco.com and it makes sense ok.Other IPSec sample configs are all based on nat0, but I need to NAT my traffic before it enters the VPN tunnel to the Checkpoint FW, using static nat mappings.I am ...

I have created a pool of 32 IP address. Every time a vpn client logs in, it takes one address. However, it never goes back to the first one. If I log in three times a day, I am taking 3 different Ip address, with every one taking a higher number. Is ...

We have 2621XMs at a few of our sitesI am looking to purchase a 2621XM for a site that needs a DMZ and Internet connectivity. I am considering using the IOS firewall for now because the PIX is not an option (monetary constraints). I am looking at the...

Hi,I' trying to create a hub and spoke VPN so two remote sites can have a ipsec tunnel to the central office.Is it possable to create this situation using a pix 501 at each site?As I have one of my remote sites that can connect to the central site an...

Situation: Client with Cisco VPN Dialer behind NAT Device in HomeLAN wants to connect to PIX501 via VPN. On the VPN Dialer Software "Transparent Tunneling (PAT/NAT)" is enabled.On PIX501 sysopt connection permit-ipsec enabled. VPN tunnel is built, bu...

Hi,I have a VPN connexion between a small office and a central office.Small office : I have a cisco 831 ADSL.Central office : I have a a cisco 806 configure to terminate VPN connexion.The users on small office use a Cisco VPN client. There is no prob...

Will this work??

I setup a site-site VPN between PIX on my end and a IBM OS/390 on the other end. I also have a dynamic VPN setup for remote users. The dynamic VPN is working fine . I have a problem with the site-site VPN in that when I initiate the tunnel , it works...

Hi I have a router 837 that have to be a Easy VPN server for software clients and too do a VPN with other router, but I see that only works the VPN with the other router.This is the configuration of the router:barcelona#sh runBuilding configuration.....

Is it possible to 'bundle' multiple IPSec tunnels across different facilities (i.e. ISPs) and have them appear as a one larger logical bundle. In other words, bundling IPSec tunnels accross different ISPs to appear like a single MLPPP bundle.Scenari...

When trying to install a new Root CA cetificate (having no previously installed CA certificates), on a VPN 3000 Concentrator Series, the built-in Concentrator Manager reports the error "Error installing trusted certificate: Unable to install trusted ...

Hello All,I'm having an issue creating an IPsec transport with a Win2k Laptop.I have gone through all the VPN examples I could find and built a system that is pretty flexible(has sets for ah-sha-hmac esp-3des esp-sha-hmac and esp-des esp-sha-hmac for...

Our internal network is 10.10.1.0/24 and is accessible via VPN clients (VPN Client 4.0) connecting to a PIX. When connected, the client receives a remote IP address in the range 10.10.10.0/24. One of our users is currently located in an office that a...